Analisis Pengendalian Kualitas Produksi Papan Fiber Semen dengan Metode Seven Tools dan FMEA pada PT. XYZ
DOI:
https://doi.org/10.33379/gtech.v8i2.4162Keywords:
QUALITY CONTROLAbstract
Product failure is a problem that always exists in the manufacturing industry. This analysis is carried out to determine the types of defects that often arise and the factors that cause product failure that arise that affect product quality at PT. XYZ. This analysis checks the quality control steps carried out in the fiber cement board production process. Aims to determine the cause and effect of production defects at PT. XYZ by using seventools and fmea (Failure Mode and Effect) methods. taken from production data at PT. XYZ in December 2022 – May 2023, with a total production of 1,173,690 pcs and a total number of defects of 72. 848 pcs for six months. The results of the analysis that can be known are the number of types of cracked product defects is the most dominant cacan with a total of 16,307 pcs, the cause of product defects can be caused by machine factors and seen from the results of avoidance the RPN risk priority number is 392.
References
A. Suherman., & B.J. Cahyana, ”Pengendalian Kualitas dengan Metode Failure Mode Effect and Analysis (FMEA) DAN Pendekatan Kaizen untuk Menggurangi Jumlah Kecacatan dan Penyebabnya,” J. UMJ, vol.16, pp. 1-9,2019.
Adita, N., Oyon, S., & Iwan, S. (2019). ” ANALISIS PENGENDALIAN KUALITAS (QUALITY CONTROL) DALAM MENINGKATKAN KUALITAS PRODUK” DOI: http://dx.doi.org/10.2827/ekonologi.v6i2.2983.g
Ardiansya Armawan (2022). Usulan Perbaikan Loading Rate Difasilitas Automatic Line Packer Menggunakan Metode Seven Tools Dan Fault Tree Analsis (Studi Kasus : PT. Cemindo Gemilang Gresik). DOI: http://dx.doi.org/10.30587/justicb.v1i2.2611
Aryanto, A. T., & Auliandri, T. A. (2016). Analisis Kecacatan Produk Fillet Skin On Red Mullet Dengan The Basic Seven Tools Of Quality Dan Usulan Perbaikannya Menggunakan Metode Fmea (Failure Modes And Effect Analysis) Pada PT. Holi Mina Jaya. Jurnal Manajemen Teori Dan Terapan| Journal of Theory and Applied Management, 8(1). https://doi.org/10.20473/jmtt.v8i1.2714
D. I. Situngkir, “Pengaplikasian FMEA untuk Mendukung Pemilihan Strategi Pemeliharaan pada Paper Machine,” FLYWHEEL J. Tek. Mesin Untirta, vol. 1, no. 1, pp. 39–40, 2019, doi: 10.36055/fwl.v1i1.5489.
Haryanto, E. (2019). Analisis Pengendalian Kualitas Produk Bos Rotor Pada Proses Mesin Cnc Lathe Dengan Metode Seven Tools. Jurnal Teknik, 8(1). https://doi.org/10.31000/jt.v8i1.1595
Herlawanti, P,. & Dimas, A, P,. (2023). ”Analisa Penerapan K3 dengan Metode FMEA danFTA padaPT. Sumber Alam Santoso Pratama Banyuwangi”. DOI : 10.33379/gtech.v7i4.3390
Hernawati, Suryatman, Tina, M. Engkos Kosim, and S. Julaeha, “Pengendalian Kualitas Produksi Roma Sandwich Menggunakan Metode Statistik Quality Control (SQC) Dalam Upaya Menurunkan Reject di bagaian Packing SQC Method is Used on Roma Sandwich Production in Order to Reducethe Rejection on the Packing,” J. Ind. Manuf., vol. 5, no. 1, pp. 1–12, 2020.
Indah Nursyamsi, Ade Momon (2022). Analisa pengendalian kualitas menggunakan metode seven tools untuk meminimalkan return konsumen di PT.XYZ.
Jaka,R & Ismi Mashabai (2020). A nalisa Pengendalian Kualitas Produksi Dengan Mnggunakan Metode Seven Tools Quality DiPT. Borsya Cipta Communica. https://doi.org/10.36761/jitsa.v1i1.583
Nender, M., Manossoh, H., Tangkuman, S. J., Biaya, P., Untuk, P., Harga, M., Pada, J., Tondano, J. M., Manossoh, H., Akuntansi, J., Ekonomi, F., & Ratulangi, U. S. (2021). Analysis Of The Accounting Treatment Of Damaged And Defective Products In The Calculation Of Production Costs To Determine The Selling Price Of Ud . 7 Jaya Meubel Tondano Jurnal EMBA Vol . 9 No . 2 April 2021 , Hal . 441 - 448. 9(2), 441–448
Pratama, F. S., & Suhartini, S. (2019). Analisis Kecacatan Produk Dengan Metode Seven Tools Dan Fta Dengan Mempertimbangkan Nilai Risiko Dengan Metode Fmea. Jurnal Senopati: Sustainability, Ergonomics, Optimization, and Application of Industrial Engineering, 1(1), 43-51.
Rahman, A., W, A. V., R, M. B. I. D., & Dhiwangkara, T. (2021). Analisis Pengendalian Kualitas Produk Roll Plastik dengan Metode Seven Tools Guna Mengurangi Kecacatan di PT . Samudra Gemilang Plastindo Jurusan Teknik Industri , Institut Teknologi Adhi Tama Surabaya. Prosiding SENASTITAN, Vol. 01 20, 99–104
Saputra, A. E., & Mahbubah, N. A. (2021). Analisis Seven Tools Pada Pengendalian Kualitas Proses Vulkanisir Ban 1000 Ring 20 di CV Citra Buana Mandiri Surabaya. STRING (Satuan Tulisan Riset Dan Inovasi Teknologi), 5(3), 252. https://doi.org/10.30998/string.v5i3.8465
Tanto, A. P., Andesta, D., & Jufriyanto, M. (2023). Analisis Kecacatan Produk dengan Metode FMEA dan FTA pada Produk Meja OKT 501 di PT. Kurnia Persada Mitra Mandiri. Jurnal Serambi Engineering, 8(2).
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Vidiah Nur’Aini, Deny Andesta
This work is licensed under a Creative Commons Attribution 4.0 International License.
