Rancangan Alat Material Handling dengan Pendekatan Anthropometry Berdasarkan Perhitungan Recommended Weight Limit dan Lifting Index Pada PT. XYZ
DOI:
https://doi.org/10.33379/gtech.v8i2.4219Keywords:
Anthropometrics, Ergonomics, Material handling, Lifting Index, Recommended Weight LimitAbstract
An important activity in a production process is material handling. One of the activities carried out at PT. Workers often complain of pain in the upper arms and shoulders. Therefore, an analysis of the Weight Limit and Lifting Index recommendations was carried out to determine the maximum weight that can be carried by workers. The calculation results show that the weight of the load lifted exceeds the recommended fattening limit because the LI value is> 1 and with a maximum RWL weight of 10.90 kg, so the worker's activities are at risk of spinal damage. Based on discussions with the company, material handling equipment in the form of a trolley is required. The dimensions of the proposed trolley are that the width of the trolley base is 35 cm; (b) The length of the trolley base is 80 cm; (c) The height of the trolley is 54.47 cm; (d) Trolley handle width 35.19 cm; (e) The height of the trolley handle is 95.16 cm
References
Andianingsari, D., Rahman, A., & Kuncoro, B. N. (2022). Pengukuran Ergonomi Metode Recommended Weight Limit (RWL) Lifting Index (LI) di PT X. In IMTechno: Journal of Industrial Management and Technology (Vol. 3, Issue 2). http://jurnal.bsi.ac.id/index.php/imtechno
Ardiyanto, H. (2019). Prinsip-Prinsip Biomekanika Kualitatif: Upaya Menjembatani Teori dan Aplikasi dalam Sport Science. http://journal.unnes.ac.id/nju/index.php/mikiTerakreditasiSINTA4
Fahmi, N., & Andesta, D. (2023). Risk Analysis of Musculoskeletal Disorders Using RWL And LI Methods. 20(2), 705–712.
Humala L Napitupulu, Napitupulu, H., & Syahputra, M. A. (2019). Analisis Manual Material Handling Menggunakan Pada Pekerja Warehouse KRA PT Pamapersada Nusantara Menggunakan Metode Biomekanika. Talenta Conference Series: Energy and Engineering (EE), 2(3). https://doi.org/10.32734/ee.v2i3.773
Khoryanton, A., Yanuar, P., Fadia, D., & Haniyah, J. (2022). Analisis Recommended Weight Limit (Rwl) Dan Lifting Index (Li) Pada Frekuensi Kegiatan Pengangkatan Proses Peracikan Pt. Akashi Wahana Indonesia. In 267 Prosiding NCIET (Vol. 3).
Kunci, K. (2020). MATRIK : Jurnal Manajemen & Teknik Industri-Produksi. XXI(1), 29–40. https://doi.org/10.350587/Matrik
Muslimah, E., Yani, J. A., Pos, T., Surakarta, P., Pratiwi, I., Rafsanjani, F., & Abstraksi, P. S. (2018). ANALISIS MANUAL MATERIAL HANDLING MENGGUNAKAN NIOSH EQUATION.
Nur Iskandar, M., & Janari, D. (2021). Usulan Desain Troli Barang Menggunakan Pendekatan Antropometri Dan Ergonomi Partisipatori (Studi Kasus PT. Mataram Tunggal Garment). Jurnal Industry Xplore, 6(2).
Rizki, W. D. (2019). Analisa Perbaikan Postur Kerja Pada Aktivitas Manual Material Handling Menggunakan Metode BRIEF Survey di PT. IPKR.
Sabri Indospring Tbk, M. P. (2017a). Analisis Ergonomi Terhadap Rancangan Fasilitas Kerja Street Shot Peening Di Pt Indospring Tbk. Dengan Metode Antropometri. XVII(2), 43–50. https://doi.org/10.30587/matrik.v17i2.xxx
Safitri, N. A., Natalisanto, A. I., & Munir, R. (2023). Penerapan Hukum Newton dalam Menghitung Sudut Efektif pada Gerakan Bench Press. In Progressive Physics Journal (Vol. 4). http://jurnal.fmipa.unmul.ac.id/index.php/ppj/indexHalaman|216
Sanjaya, A. A. (2002). Aplikasi Recommended Weight Limit (Rwl) Dalam Perbaikan Cara Pengangkatan.
Saputra, A. A., Wahyudin, W., & Nugraha, B. (2020). Analisis Manual Material Handling Dalam Mengangkat Bahan Baku Dengan Menggunakan Metode Pendekatan Biomekanika Kerja (Ergonomi) DI PT. XYZ. Jurnal Sains Dan Teknologi, 20(2).
Sari, S., & Meriyanti, D. (2021). Analisis Perhitungan Recommended Weight Limit dan Lifting Index Pada Bagian Consumer Packing (CP) PT. Bogasari. Jurnal Ergonomi Indonesia, 7(2), 31–43. https://doi.org/10.24843/JEI.2021.v07.i02.p03
Siska, M., Deviska Rizki, W., Taslim, R., & Yola, D. M. (2019). Perbaikan Postur Kerja Manual Material Handling Menggunakan Baseline Risk Identification of Ergonomic Factors (BRIEF) Survey di PT. IPKR KM (Vol. 12).
Sugiyono. (2016). Metode Penelitian Kuantitatif, Kualitatif dan R&D. Alfabet.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Muhammad Faisal Yunia Hanafi, Efta Dhartikasari Priyana, Yanuar Pandu Negoro
This work is licensed under a Creative Commons Attribution 4.0 International License.
