Analisis Efektivitas Mesin Pemotong Pada Kain Kapas Menggunakan Metode OEE dan FMEA di UMKM IBS
DOI:
https://doi.org/10.70609/gtech.v8i4.5048Keywords:
OEE; FMEA; Machine Performance; Material Defects, EffectivenessAbstract
IBS MSME is a home industry that produces baby sofas, baby bedding, and other products using cotton fabric as raw materials. The fabric cutting process often results in defects, which can occur due to several factors, including machine-related problems. A study was conducted to evaluate the performance of the cutting machine using the OEE and FMEA methods. The OEE analysis showed a score of 81.56%, below the desired standard of 85%. In addition, the study identified six major losses, including breakdowns, tuning and adjustment, speed drop, production stoppage, and defects. FMEA analysis showed a Risk Priority Number (RPN) of 392 due to a lack of focus and understanding on human factors. To improve the effectiveness of MSME IBS, corrective actions are needed in terms of machine maintenance and labor vigilance.
References
Amilia, K., Dahda, S. S., & Ismiyah, E. (2021). ANALISIS KINERJA FASILITAS PRODUKSI DIOCTYLE PHTALATE DAN DIISONONYL PHTHALATE DENGAN MENGGUNAKAN METODE OVERALL EQUIPMENT EFFECTIVENESS. JUSTI (Jurnal Sistem Dan Teknik Industri), 1(2), 164-186.
Ariyah, H. (2022). Penerapan Metode Overall Equipment Effectiveness (OEE) Dalam Peningkatan Efisiensi Mesin Batching Plant(Studi Kasus:PT. Lutvindo Wijaya Perkasa). Jurnal Teknologi dan Manajemen Industri Terapan, 1(2), 70-77.
Farrizqi, D. M., & Andesta, D. (2024). Analisis Pengendalian Kualitas dengan Menggunakan Metode Failure Modeand Effect Analysis dan Fault Tree Analysispada Produk Songkok UD.XYZ. 8(2), 835-846.
Fauzi, H., Alhilman, J., & Atmaji, D. T. (2021). ANALISISPENERAPANOVERALL EQUIPMENTEFFECTIVENESS(OEE) DAN OVERALL RESOURCE EFFECTIVENESS(ORE)DALAMMENGEVALUASI EFEKTIVITASMESIN CNCMILLAC DI PT DIRGANTARAINDONESIA. e-Proceeding of Engineering(8), 2107-2114.
Hafiz, K., & Martianis, E. (2019). Analisis Overall Equiqment Effectiveness (OEE) pada Mesin Caterpillar Type 3512B. Jurnal Ilmiah Teknik Mesin, 13(2), 87-96.
Hermawan, A., Doto, & Akmal, R. (2022). PENERAPAN METODE OVERALL EQUIPMENT EFFECTIVENESS. Jurnal Taguchi : JURNAL KEILMIAH KEILMUAN TEKNIK DAN MANAJEMEN INDUSTRI, 2(2), 197-220.
Khatammi, A., & Rizqi, W. A. (2022). Analisis Kecacatan Produk Pada Hasil Pengelasan. Jurnal Serambi Engineering, 7(2), 2922-2928.
Nurwulan, R. N., & Fikri, K. D. (2020). AnalisisProduktivitas dengan Metode OEE dan Six Big Losses: Studi Kasus di Tambang Batu Bara. Jurnal IKRAITH-EKONOMIKA, 3(3), 30-35.
Priambodo, B., Nursanti, E., & Laksamana, I. D. (2021). Analisa Risiko Lift (Elevator) dengan Metode FMEA. Jurnal Teknologi dan Manajemen Industri, 7(2), 7-12.
Rabiatussyifa, O., Azizah, N. F., & Ardhani, D. A. (2022). Analisis Produktivitas Mesin Buffing Menggunakan Metode Overall Equiqment Effectiveness (OEE) Di PT. YZ Cikarang, Jawa Barat. Jurnal Ilmiah Wahana Pendidikan, 8(3), 95-102.
Rinoza, M., Junaidi, & Kurniawan, A. F. (2021). ANALISA RPN (RISK PRIORITY NUMBER) TERHADAP KEANDALAN. Jurnal UISU, 17(1), 34-40.
Romadhoni, i. M., Andesta, D., & Hidayat. (2022). IDENTIFIKASI KECACATAN PRODUK KERANGKA BANGUNAN DI PT. RAVANA. Journal of Industrial Engineering and Operation Management, 5(2), 236-247.
Suherman, A., & Cahyana, J. B. (2019, Desember 16). Pengendalian Kualitas Dengan Metode Failure Mode Effect And Analysis. Retrieved from jurnal.umj.ac.id/index.php/semnastek: https://jurnal.umj.ac.id/index.php/semnastek/article/download/5222/3501
Tammya, E., & Herwanto, D. (2021). Analisis Efektivitas Mesin Debarker Dengan Menggunakan Metode Overall Equipment Effectiveness (OEE) Di PT. XYZ Kuningan, Jawa. SITEKIN : Jurnal Sains, Teknologi dan Industri, 19(1), 20-27.
Ummah, H. N., & Dahda, S. S. (2022). Analisis Efektifitas Kinerja Mesin Cutting Manual Dan Otomatis Menggunakan Metode OEE (Overall Equipment Effectiveness )Di PT. XYZ. Jurnal Hasil dan Karya Ilhmiah Dalam Bidang Teknik Industri, 8(2), 345-354.
Wahid, A. (2020). Penerapan Total Productive Maintenance (TPM) Produksi Dengan Metode Overall Equipment Effectivienss (OEE) pada Proses Produksi Botol (PT. XY Pandaan - Pasuruan. Jurnal Teknologi Dan Manajemen Industri, 6(1), 12-16.
Wijaya, S. B., Andesta, D., & Priyana, D. E. (2021). Minimasi Kecacatan pada Produk Kemasan Kedelai Menggunakan Six Sigma, FMEA dan Seven Tools di PT. SATP. Jurnal Serambi Engineering, 5(2), 83-91.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Moh Ilham Alfarisi, Deny Andesta
This work is licensed under a Creative Commons Attribution 4.0 International License.
