Analisis Pengendalian Kualitas Pada Produk Songkok Menggunakan Metode FMEA dan FTA Pada CV. ABC
DOI:
https://doi.org/10.70609/gtech.v8i4.5284Keywords:
FMEA, FTA, RPNAbstract
As the industrial world continues to advance, competition between companies is becoming increasingly fierce. To enhance customer satisfaction, companies must be able to provide the best quality. CV. ABC is a manufacturing company focused on producing *songkok* (traditional caps). However, during the production process, the company faces several challenges, particularly with defective products. The purpose of this study is to conduct quality control using the Failure Mode and Effect Analysis (FMEA) and Fault Tree Analysis (FTA) methods.The results of the FMEA calculations are as follows: the sewing machine encountered needle breakage issues with an RPN (Risk Priority Number) of 448, dull and poorly maintained cutting tools during the stitching process with an RPN of 576, low-quality raw materials with an RPN of 504, and a substandard screen-printing tool with an RPN of 648. Through the FTA method, the causes of failure include human factors, machine malfunctions, and poor-quality raw materials.
References
Faishal Thariq, M., & Fahma, F. (2020). Seminar dan Konferensi Nasional IDEC 2020.
Farrizqi, M. D., & Andesta, D. (2024). Analisis Pengendalian Kualitas dengan Menggunakan Metode Failure Mode and Effect Analysis dan Fault Tree Analysis pada Produk Songkok UD. XYZ. G-Tech: Jurnal Teknologi Terapan, 8(2), 835–846. https://doi.org/10.33379/gtech.v8i2.4052
Gautama, R. P., & Marihot, N. (2021). Analisis Risiko Operasional Menggunakan Metode FMEA di CV. Gamarends Marine Supply Surabaya.
Krisnaningsih, E., Gautama, P., Fatih, M., & Syams, K. (2021). USULAN PERBAIKAN KUALITAS DENGAN MENGGUNAKAN METODE FTA DAN FMEA. In Jurnal InTent (Vol. 4, Issue 1).
Luthfi, A., Falah, N., Arief, K., & Sa’id Riginianto, R. (2023). Analisis Pengendalian Kualitas Pada Tempe Menggunakan Metode Seven Tools Dan FMEA. Jurnal Teknologi Dan Manajemen Industri Terapan (JTMIT), 2(3), 212–223. https://doi.org/https://doi.org/10.55826/tmit.v2i3.264
Mayangsari, D. F., Adianto, H., & Yuniati, Y. (2019). USULAN PENGENDALIAN KUALITAS PRODUK ISOLATOR DENGAN METODE FAILURE MODE AND EFFECT ANALYSIS (FMEA) DAN FAULT TREE ANALYSIS (FTA) * DIANA FITRIA MAYANGSARI, HARI ADIANTO, YOANITA YUNIATI. Jurnal Online Institut Teknologi Nasional , 81–91.
Mukminin, A., & Salim Dahda, S. (2022). Identifikasi Penyebab Kecacatan Kemasan Minyak Kelapa Sawit Menggunakan Metode FMEA dan FTA pada Departemen Shortening (Studi Kasus: PT. XYZ). Serambi Engineering, VII(4).
Munaroh, L., Amrozi, yusuf, & Nurudin, R. A. (2021). Pengukuran Risiko Keamanan Aset TI Menggunakan Metode FMEA dan Standar ISO/IEC 27001:2013 Lailatul Munaroh 1 Yusuf Amrozi 2 Risky Agung Nurdian 3. In TMJ (Technomedia Journal) (Vol. 5, Issue 2).
Pangestuti, D. C., Nastiti, H., & Husniaty, R. (2022). Analisis Risiko Operasional Dengan Metode FMEA. 10(2), 177.
Rinoza, M., & Ahmad Kurniawan, F. (2021). ANALISA RPN (RISK PRIORITY NUMBER) TERHADAP KEANDALAN KOMPONEN MESIN KOMPRESORDOUBLE SCREW MENGGUNAKAN METODE FMEA DI PABRIK SEMEN PT. XYZ. In Cetak) Buletin Utama Teknik (Vol. 17, Issue 1). Online.
Romadhoni, M. I., Kecacatan, I., Kerangka…, P., Kerangka, P., Di, B., Ravana, P. T., Menggunakan, J., Fmea, M., Fta, D., Andesta, D., & Hidayat, D. (2022). IDENTIFICATION OF DEFECTS IN BUILDING FRAMEWORK PRODUCT USING FMEA AND FTA METHODS. In JIEOM (Vol. 05, Issue 02). https://ojs.uniska-bjm.ac.id/index.php/jieom/index
Sajiwo, H. B., Luh, N., & Hariastuti, P. (2021). Analisis Produktivitas Menggunakan Metode Objective Matrix (OMAX) dan Fault Tree Analysis (FTA) di PT. Elang Jagad.
Sari, D. P., Marpaung, K. F., Calvin, T., & Handayani, N. U. (2018). ANALISIS PENYEBAB CACAT MENGGUNAKAN METODE FMEA DAN FTA PADA DEPARTEMEN FINAL SANDING PT EBAKO NUSANTARA.
Setia Pratama, F., & suhartini. (2019). Jurnal SENOPATI Sustainability, Ergonomics, Optimization, and Application of Industrial Engineering Analisis Kecacatan Produk dengan Metode Seven Tools dan FTA dengan Mempertimbangkan Nilai Risiko berdasarkan Metode FMEA. https://doi.org/https://doi.org/10.31284/j.senopati.2019.v1i1.534
Wicaksono, A., Yuamita Fakultas sains dan teknologi, F., Teknik Industri, J., Teknologi Yogyakarta Jl Siliwangi Jl Ring Road Utara, U., Lor, J., Mlati, K., & Sleman, K. (2022). Pengendalian Kualitas Produksi Sarden Mengunakan Metode Failure Mode And Effect Analysis (FMEA) Dan Fault Tree Analysis (FTA) Untuk Meminimalkan Cacat Kaleng Di PT XYZ. Jurnal Teknologi Dan Manajemen Industri Terapan (JTMIT), 1(3), 145–154.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Ahmad Fasih Hasibu Dzikri, Hidayat Hidayat, Yanuar Pandu Negoro
This work is licensed under a Creative Commons Attribution 4.0 International License.
