Quality Control of Wood Pallet at CV. Mandiri Jaya to Reduce Product Defects Using Statistical Quality Tools and FMEA Methods
DOI:
https://doi.org/10.70609/gtech.v9i2.6616Keywords:
Quality Control, Wooden Pallets, Qualitiy Statistics Tools, FMEA, Production DefectsAbstract
This research focuses on improving the quality control of wooden pallets at CV Mandiri Jaya to minimize production defects by utilizing Statistical Quality Tools and the Failure Mode and Effect Analysis (FMEA) method. As a company engaged in manufacturing wooden pallets, CV Mandiri Jaya faces challenges in maintaining consistent product quality. The data collected was analyzed using Statistical Quality Tools, which include check sheets, Pareto diagrams, control charts, and fishbone diagrams to identify and propagate defects. The FMEA method was then applied to determine and prioritize the root causes of defects based on the Risk Priority Number (RPN).The findings show that the most frequent defects are top board dimension mismatch, improper stiffening, and wood cracking. By identifying the root causes of these defects, appropriate corrective actions can be proposed. The results showed that the implementation of this method effectively reduced the number of defective products from 26.1% to 19.5%, which means a decrease of 25.3%. In addition, production efficiency was significantly improved.This research provides a practical framework for manufacturing companies to improve their quality control strategies, ensure higher products, and improve competitiveness in the market.
References
Abdullah, R., Ariastuti, W., & Nuraini, R. (2023). Quality Control of Wedang Uwuh Packaging at CV Progress Jogja. Integrasi Jurnal Ilmiah Teknik Industri, 8(1), 1.
Aryanto, A. T., & Auliandri, T. A. (2016). Analisis Kecacatan Produk Fillet Skin On Red Mullet Dengan The Basic Seven Tools Of Quality Dan Usulan Perbaikannya Menggunakan Metode Fmea (Failure Modes And Effect Analysis) Pada PT. Holi Mina Jaya. Jurnal Manajemen Teori Dan Terapan| Journal of Theory and Applied Management, 8(1). https://doi.org/10.20473/jmtt.v8i1.2714
Basori, M. (2019). A nalisis Pengendalian Kualitas Cetakan P ackaging D engan Metode F ailure Mode and Effect Analysis ( FMEA ). 158–163.
Indranata, M. D., Andesta, D., & Hidayat. (2022). Pengendalian Kualitas Produk Kerupuk Bawang Menggunakan Metode Seven Tools (Studi Kasus: UMKM Kerupuk Dinda). Serambi Engineering, VII(2), 3120–3128.
Nisa, K. S., Melyna, E., Maulana, M. I., & Ridwan, M. A. A. (2023). Perbaikan Kualitas Produksi dengan Metode Failure Mode and Effect Analysis (FMEA) di PT. ABC. Journal of Community Services in Sustainability, 1(1), 37–46. https://doi.org/10.52330/jocss.v1i1.139
Sofyan, H., Maydi, R., Putra, S., Gumelar, I., Sutartiah, F., Studi, P., Industri, T., & Teknologi, S. T. (2024). Menggunakan Metode Seven Tools Dan Failure Mode and Effect Analysis Di. 5(1), 10–18.
Anastasya, A., & Yuamita, F. (2022). Pengendalian kualitas pada produksi air minum dalam kemasan botol 330 ml menggunakan metode failure mode effect analysis (FMEA) di PDAM Tirta Sembada. Jurnal Teknologi dan Manajemen Industri Terapan, 1(I), 15-21.
Damaindra, M., & Cahyana, A. (2017). Peningkatan kualitas produk pada mesin produksi Nonwoven Spunbond dengan menggunakan metode seven tools dan FMEA. Spektrum Industri, 15 (2), 245.
Dewangga, A., & Suseno, S. (2022). Analisa Pengendalian Kualitas Produksi Plywood Menggunakan Metode Seven Tools, Failure Mode And Effect Analysis (FMEA), Dan TRIZ. Jurnal Teknologi dan Manajemen Industri Terapan, 1 (3), 243-253.
Falah, A., Arief, K., & Riginianto, R. (2023). Analisis Pengendalian Kualitas Pada Tempe Menggunakan Metode Seven Tools Dan FMEA. Jurnal Teknologi dan Manajemen Industri Terapan, 2 (3), 212-223.
Harma, B. F., & Miliandini, E. (2022). Analisis Kualitas Minyak Sawit Mentah Menggunakan Seven Tools dan Kaizen. Jurnal Teknologi, 12 (1), 14-21.
Iriyanto, A., Bangun, C. S., & Rasjidin, R. (2024). Pengurangan Cacat Mie Sachet dengan Penerapan Seven Tools dan Metode FMEA. Ranah Research: Jurnal Penelitian dan Pengembangan Multidisiplin, 7 (1), 257-262.
Kalid, S. (2022). Pengendalian Kualitas Cacat Produk Tas Kulit Dengan Metode Failure Mode And Effect Analysis (Fmea) Dan Fault Tree Analysis (FTA) Di Pt Mandiri Jogja Internasional. Jurnal Cakrawala Ilmiah, 1 (6), 1307-1320.
Nurfaizi, M., & Setiafindari, W. (2024). Upaya Peningkatan Kualitas Produk Dengan Metode Six Sigma dan FMEA di PT Yogya Presisi Tehnikatama Industri. JURNAL ILMIAH TEKNIK INDUSTRI DAN INOVASI , 2 (4), 1-16.
Pratama, F. S., & Suhartini, S. (2019). Analisis Kecacatan Produk Dengan Metode Seven Tools Dan Fta Dengan Mempertimbangkan Nilai Risiko Dengan Metode Fmea. Jurnal Senopati: Sustainability, Ergonomics, Optimization, and Application of Industrial Engineeri, 1(1), 43-51.
Pratama, N. D., & Al-Faritsy, A. (2023). Analisis Pengendalian Kualitas Dengan Metode Seven Tools Dan Kaizen Dalam Upaya Mengurangi Tingkat Kerugian Produk. Jurnal Teknologi dan Manajemen Industri Terapan, 2 (2), 53-62.
Sambodo, P., & Cahyana, A. (2022). Pengendalian Kualitas Produk di CV XYZ Menggunakan Seven Tools dan Quality Control Circle. Procedia of Engineering and Life Science, 3 .
Sucipto, D., & Herwanto, D. (2022). Pengendalian Kualitas Proses Knitting dengan 4 Alat QC dan Failure Mode and Effect Analysis (FMEA). MOTIVECTION: Jurnal Teknik Mesin, Listrik dan Industri, 4 (2), 65-76.
Wicaksono, A., & Yuamita, F. (2022). Pengendalian Kualitas Produksi Sarden Mengunakan Metode Failure Mode And Effect Analysis (FMEA) Dan Fault Tree Analysis (FTA) Untuk Meminimalkan Cacat Kaleng Di PT XYZ. Jurnal Teknologi Dan Manajemen Industri Terapan, 1 (3), 145-154.
Wijaya, B., & Andesta, D. (2021). Minimasi Kecacatan pada Produk Kemasan Kedelai Menggunakan Six Sigma, FMEA dan Seven Tools di PT. SATP. Jurnal Media Teknik Dan Sistem Industri, 5 (2, 83-91.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 M. Sahrur Romdloni, Moch. Nuruddin
This work is licensed under a Creative Commons Attribution 4.0 International License.
