Pengaruh Variasi Tebal Magnet Terhadap Nilai Back EMF dan Ke pada Pemodelan PMSG 12S8P
DOI:
https://doi.org/10.33379/gtech.v7i1.1954Keywords:
PMSG, Generator, Back EMF, Tebal Magnet, 12S8PAbstract
The use of new and renewable energy must be the main concern of the Indonesian government to realize clean, environmentally friendly energy. One of the new renewable energies that has great potential in the world, including in Indonesia, and which has not yet been maximized, is wind energy. Micro-scale power plants are one of the ways to utilize energy sources that can be used to support the distribution of the electrification program in Indonesia. One type of generator for electricity source technology from renewable energy that can be developed is the Permanent Magnet Synchronous Generator (PMSG). This research was carried out by varying the thickness of the magnet on PMSG 12S8P. The experimental method was carried out by modeling simulation on Infolytica MagNet software. The variation of the thickness of the magnet used in the experiment was 3mm, 6mm, 9mm with a speed of 1000rpm. From several variations of the simulation experiment, it is known that the thickness of the magnet can affect the density and distribution of the flux and its value is directly proportional to the thickness of the magnet. The thicker the magnet, the higher the Back EMF and Ke Constant values.
References
Arifianto, I., & HS, M. R. (2018). Analisa Efisiensi dan Rancang Generator Permanent Magnet 12 Slot 8 Pole Menggunakan Software Magnet 7 . 5. Seminar Nasional Microwave, Antena Dan Propagasi (SMAP), 43–48.
Arthur, S., Sumawang, E., & Pramono, S. (2022). Analisis Perubahan Jumlah Slot pada Permanent Magnet Synchronous Generator ( PMSG ) untuk Mencapai Nilai Optimal Back EMF dan KE berbasis Finite Element Method ( FEM ). 43(2), 140–146. https://doi.org/10.14710/teknik.v43i2.44519
Bagus, I., Citarsa, F., Ayu, I., & Adnyani, S. (2022). Pengaruh Ketebalan Magnet Rotor terhadap Back EMF dan Efisiensi Permanent Magnet Synchronous Generator 12S8P. 9(1), 11–17. https://dielektrika.unram.ac.id
Buana, U. C., & Santoso, D. B. (2022). DENGAN NILAI COGGING TORQUE RENDAH. 7(2), 61–68.
Cholis, N., & Prasetyono, R. N. (2022). Analisa Pengaruh Letak Magnet Dan Penambahan Fluks Berrier Terhadap Nilai Back EMF Pada PMSG 12S8P Menggunakan Metode FEM. 3–9.
Fikri, M. N., Buana, U. C., & Santoso, D. B. (2022). Desain Permanent Magnet Synchronous Generator Untuk Pembangkit Listrik Tenaga Bayu Daya 500 Watt Dengan Kecepatan Angin Rendah. JTEV (Jurnal Teknik Elektro Dan Vokasional), 8(2), 200. https://doi.org/10.24036/jtev.v8i2.116750
Ilmiah, P., Pambudi, D. W., Studi, P., Elektro, T., Teknik, F., & Surakarta, U. M. (2022). Analisa pengaruh variasi umbrella dan tebal magnet terhadap nilai back-emf dan ke pada permodelan permanent magnet synchronous generator 12s8p menggunakan software magnet infolytica.
Prasetyo, Y. (2019). Analisis Perbandingan Bahan Material Magnet Dalam Pemodelan Permanent Magnet Synchronous Generator (PMSG) 12 Slot 8 Kutub Dengan Menggunakan Finite Elemen Method (FEM) Software.
Putri, T. D. (2022). 3279-10571-1-Pb. 11(1), 45–50.
Saputra, R., & Aini, Z. (2021). Analisis Pengaruh Ketebalan dan Jenis Inti Besi Rotor Stator terhadap Karakteristik Generator Sinkron Magnet Permanen 18S16P Fluks Radial. Jurnal Sains, Teknologi Dan Industri, 18(2), 220–227.
Ujang, U. C. B. (2022). Analisis Pengaruh Lebar Teeth Terhadap Penurunan Nilai Cogging Torque Pada Pmsg 18S16P. Electrician, 16(1), 1–8. https://doi.org/10.23960/elc.v16n1.2245
Yasyak, M. I., Studi, P., Elektro, T., Teknik, F., & Surakarta, U. M. (2021). Naspub FIX_Muhamad Ibnu Yasyak_D400170137 (1).
Zaputra, T. P., & Gusnita, N. (2022). Analisis Pengaruh Jumlah Lilitan dan Kecepatan Putar Terhadap Efisiensi Pada Permanent Magnet Synchronus Generator 18 Slot 16 Pole. JTEV (Jurnal Teknik Elektro Dan Vokasional), 8(2), 411. https://doi.org/10.24036/jtev.v8i2.117875
Downloads
Published
Issue
Section
License
Copyright (c) 2023 Rohmad Mucharom, Bayu Aji Saputro, Veryn Resvia Dhena
This work is licensed under a Creative Commons Attribution 4.0 International License.
