Analisis Pengaruh Variasi Sudut Pelat Penukar Kalor Terhadap Besarnya Koefisien Perpindahan Kalor Secara Konveksi
DOI:
https://doi.org/10.33379/gtech.v7i3.2531Keywords:
Sudut, Kontruksi, Koefisien, KonveksiAbstract
One of the added values of motorized vehicles is that because of their attractive shape or following fashion trends, to achieve this attractive shape, the construction of the engine components must also be designed to suit the design form. The purpose of this study was to determine the effect of variations in the angle of the heating plate with the air flow rate on the magnitude of the convection heat transfer coefficient. The research method used is experimental which is used to test the effect of a treatment or a new design on a process. The result is that the greater the angle formed between the heating plate and the direction of flow, the smaller the heat transfer that occurs from the plate to the air, this is indicated by a decrease in the convection heat transfer coefficient, this decrease is caused by the greater the angle formed between the heater and the direction of flow, the greater the heating area experience heat transfer by convection will be smaller.
References
Forooghi, P., & Hooman, K. (2014). Experimental analysis of heat transfer of supercritical fluids in plate heat exchangers. International Journal of Heat and Mass Transfer, 74, 448–459. https://doi.org/10.1016/j.ijheatmasstransfer.2014.03.052
Giurgiu, O., Pleşa, A., & Opruţa, D. (2014). The effect of plate heat exchanger’s geometry on heat transfer. Leonardo Electronic Journal of Practices and Technologies, 13(25), 254–263.
Goodarzi, M., D’Orazio, A., Keshavarzi, A., Mousavi, S., & Karimipour, A. (2018). Develop the nano scale method of lattice Boltzmann to predict the fluid flow and heat transfer of air in the inclined lid driven cavity with a large heat source inside, Two case studies: Pure natural convection & mixed convection. Physica A: Statistical Mechanics and Its Applications, 509, 210–233. https://doi.org/10.1016/j.physa.2018.06.013
Khan, T. S., Khan, M. S., Chyu, M. C., & Ayub, Z. H. (2010). Experimental investigation of single phase convective heat transfer coefficient in a corrugated plate heat exchanger for multiple plate configurations. Applied Thermal Engineering, 30(8–9), 1058–1065. https://doi.org/10.1016/j.applthermaleng.2010.01.021
Kumar, V., Tiwari, A. K., & Ghosh, S. K. (2016). Effect of chevron angle on heat transfer performance in plate heat exchanger using ZnO/water nanofluid. Energy Conversion and Management, 118, 142–154. https://doi.org/10.1016/j.enconman.2016.03.086
Ramadhan, N., Soeparman, S., Widodo, A., Teknik, J., Fakultas, M., Universitas, T., & Jl, B. (2017). Analisis Perpindahan Panas Pada Kolektor Pemanas Air Tenaga Surya Dengan Turbulence Enhancer. Jurnal Rekayasa Mesin, 8(1), 15–22.
Sarraf, K., Launay, S., & Tadrist, L. (2015). Complex 3D-flow analysis and corrugation angle effect in plate heat exchangers. International Journal of Thermal Sciences, 94, 126–138. https://doi.org/10.1016/j.ijthermalsci.2015.03.002
Teddy Nurcahyadi. (2017). Perpindahan kalor konveksi dan alat penukar kalor.
Umurani, K., Nasution, A. R., & Irwansyah, D. (2021). Perpindahan Panas Dan Penurunan Tekanan Pada Saluran Segiempat Dengan Rusuk V 90 Derajat. Jurnal Rekayasa Material, Manufaktur Dan Energi, 4(1), 37–46. https://creativecommons.org/licenses/by-sa/4.0/
Downloads
Published
Issue
Section
License
Copyright (c) 2023 Margianto, Unung Lesmanah, Cepi Yazirin
This work is licensed under a Creative Commons Attribution 4.0 International License.
