Design Join Composite Memanfaatkan Ketahanan Alam dari Cabang Pohon untuk Meningkatkan Toleransi Kerusakan
DOI:
https://doi.org/10.33379/gtech.v8i1.3939Keywords:
Join Composite, Cabang pohong, Toleransi kerusakanAbstract
Optimization and innovation are necessary to enhance the resilience of transportation, particularly through the improvement of connections. Connections play a crucial role, especially in structural designs that often utilize various types of joints. The use of composite connection components inspired by nature, such as tree branch connections, can be a solution to improve joint resilience. Tree branch connections exhibit desired structural properties, including strength, toughness, fatigue resistance, and damage tolerance. The application of Advanced Additive Manufacturing, such as stereo-lithography, is employed to integrate fiber structures in joint designs. These joints aim to replace bolts and nuts, which can damage load-bearing fibers and increase local stresses. Testing indicates that tree branch-inspired joint designs, especially with 37.5% embedding, provide the most optimal results with the best values for stress, displacement, and safety factors compared to other joint design variations.
References
Alfano, M., Furgiuele, F., Lubineau, G., & Paulino, G. H. (2011). Simulation of debonding in Al/epoxy T-peel joints using a potential-based cohesive zone model. Procedia Engineering, 10, 1760-1765.
Anam, A. B., & Adiwidodo, S. (2021, December). Simulasi Kekuatan Dan Ergonomi E-Scooter Untuk Mobilitas Di Area Kampus. In Seminar Nasional Rekayasa Teknologi Manufaktur (Vol. 1, pp. 84-88).
Basri, F. R., Yudo, H., & Amiruddin, W. (2016). Analisa Kekuatan Sambungan Pipa T Joint Menggunakan Pelat Penguat Dengan Variabel Dh/Db Menggunakan Metode Elemen Hingga. Jurnal Teknik Perkapalan, 4(3).
Burns, L. A., Mouritz, A. P., Pook, D., & Feih, S. (2012). Bio-inspired design of aerospace composite joints for improved damage tolerance. Composite Structures, 94(3), 995-1004.
Burns, L. A., Mouritz, A. P., Pook, D., & Feih, S. (2012). Strength improvement to composite T-joints under bending through bio-inspired design. Composites Part A: Applied Science and Manufacturing, 43(11), 1971-1980.
Burns, L., Mouritz, A. P., Pook, D., & Feih, S. (2015). Bio-inspired hierarchical design of composite T-joints with improved structural properties. Composites Part B: Engineering, 69, 222-231.
Cheng, H. E., Fengjiang, Z. H. A. N., Luchuang, M. A., Gang, C. H. E. N., & Jianying, M. A. (2023). Aero-structural design of joined-wing aircraft based on high-fidelity model. Chinese Journal of Aeronautics.
de Carvalho, W. S., & Amancio-Filho, S. T. (2022). On the feasibility of joining additively-manufactured 316L stainless steel and poly-ether-ether-ketone by ultrasonic energy. Additive Manufacturing Letters, 3, 100098.
Eder, M., Jungnikl, K., & Burgert, I. (2009). A close-up view of wood structure and properties across a growth ring of Norway spruce (Picea abies [L] Karst.). Trees, 23, 79-84.
Goetz, K., & Mattheck, C. (2001). Trees as a model for technical fibre composites. WIT Transactions on The Built Environment, 54.
Jungnikl, K., Goebbels, J., Burgert, I., & Fratzl, P. (2009). The role of material properties for the mechanical adaptation at branch junctions. Trees, 23, 605-610.
Maulana, M. I., & Rasyid, A. H. A. (2022). Simulasi Parameter Pengelasan Gesek Rotari Pada Al Alloy 6061 T-6 dan AISI 1018 Dengan Finite Element Method (FEM). Otopro, 38-47.
Meyers, M. A., Chen, P. Y., Lin, A. Y. M., & Seki, Y. (2008). Biological materials: Structure and mechanical properties. Progress in materials science, 53(1), 1-206.
Puasay, R., Mustafa, M., Naharuddin, N., Fadly, M. S., & Yandi, Y. Analisis Teoritis Dan Eksperimental Defleksi Pada Kayu Dengan Variasi Jenis Dan Posisi Perletakan. Jurnal MEKANIKAL, 14(1).
Rahardja, I. B., Rahdiana, N., Mulyadi, D., Al Afghani, A., & Ramadhan, A. I. (2020). Analisis Pengaruh Radius Bending Pada Proses Bending Menggunakan Pelat Spcc-Sd Terhadap Perubahan Struktur Mikro. Jurnal Teknik Mesin Mechanical Xplore, 1(1), 1-10.
Ramadhan, A. H., Widyanto, S. A., & Widodo, A. (2014). Simulasi defleksi beban statis dan analisis perilaku damping konstruksi kayu untuk pengembangan bed mesin perkakas. Jurnal Teknik Mesin, 2(3), 305-314.
Suzdayan, R. Pengaruh Kekuatan Struktur Material Komposit Sandwich Plate Fiberglass Terhadap Biro Klasifikasi.
Wibawa, L. A. N. (2020). Pengaruh Ketebalan Cap dan Tekanan Internal terhadap Tegangan Von Mises Silinder Berdinding Tebal untuk Tabung Motor Roket. Jurnal Teknik, 41(2), 111-118.
Zhang, B., Fei, B. H., Yu, Y., & Zhao, R. J. (2007). Microfibril angle variability in Masson pine (Pinus massoniana Lamb.) using X-ray diffraction. Forestry Studies in China, 9, 33-38.
Downloads
Published
Issue
Section
License
Copyright (c) 2023 Muhammad Yusuf, Jusef Saiful, Sunarko Sunarko
This work is licensed under a Creative Commons Attribution 4.0 International License.
