Performance Analysis of a Single Blade Archimedes Screw Turbine with Head Variations
DOI:
https://doi.org/10.33379/gtech.v8i2.4218Keywords:
Archimedean, head, performance, turbine, screwAbstract
An alternative solution that answers the problem of fossil energy is the use of renewable energy. Hydropower is one of the renewable energies that is widely used in the world. One kind of turbines that is suitable for application in low head conditions is the Archimedes Screw Turbine. This research aims to test the performance of Archimedes screw turbines on several heads, namely 300 mm, 500 mm and 700 mm heads. The number of blade in this turbine is one. The method used is experimentation, which is carried out in the laboratory on a designed testing installation. In this experiment, the highest power obtained at a 700 mm head was 6,407 Watts and the greatest efficiency was 26.59% at a 500 mm head variation. This shows that the performance of a turbine depends on its operating conditions.
References
Alonso-Martinez, M., Sierra, J. L., Díaz, J. J., & Martinez-Martinez, J. E. (2020). A New Methodology to Design Sustainable Archimedean Screw Turbines as Green Energy Generators. International Journal of Environmental Research and Public Health, 17, 9236. https://doi.org/10.3390/ijerph17249236.
Bilgili, F., Lorente, D. B., Kus¸kaya, S., & Ünlü, F. (2021). The role of hydropower energy in the level of CO2 emissions: An application of continuous wavelet transform. Renewable Energy, 178, 283-294. https://doi.org/10.1016/j.renene.2021.06.015.
BPS. (2022). Kapasitas Terpasang PLN menurut Jenis Pembangkit Listrik (MW), 2020-2022. (Badan Pusat Statistik (BPS - Statistics Indonesia)) Retrieved Maret 29, 2024, from https://www.bps.go.id/id/statistics-table/2/MzIxIzI=/kapasitas-terpasang-pln-menurut-jenis-pembangkit-listrik--mw-.html
Çengel, Y. A., & Cimbala, J. M. (2017). FLUID MECHANICS: FUNDAMENTALS AND APPLICATIONS (4th ed). New York: McGraw-Hill Education.
Dellinger, G., Simmons, S., Lubitz, W. D., Pierre-Andr, & Dellinger, N. (2019). Effect of slope and number of blades on Archimedes screw generator power output. Renewable Energy, 136, 896-908. https://doi.org/10.1016/j.renene.2019.01.060.
Erinofiardi, E., Koirala, R., Shiwakoti, N., & Date, A. (2022). Sustainable Power Generation Using Archimedean Screw Turbine: Influence of Blade Number on Flow and Performance. Sustainability, 14(23), 15948. https://doi.org/10.3390/su142315948.
Gogoi, P., Handique, M., Purkayastha, S., & Newar, K. (2018). Potential of Archimedes Screw Turbine in Rural India Electrification: A Review. ADBU Journal of Electrical and Electronics Engineering (AJEEE), 2(1), 30-35. Retrieved from : https://journals.dbuniversity.ac.in/ojs/index.php/AJEEE/article/view/554.
Hedia, A. I., Mouris, E. M., & Shehata, O. (2022). Design and analysis of Analytical Model of an Archimedes Screw Turbine. International Journal of Advances in Scientific Research and Engineering (ijasre), 8(7), 58-67. https://doi.org/10.31695/IJASRE.2022.8.7.5 .
Hidayanto, N., Sansuadi, Mazidah, N., & Nugroho, R. C. (2023). STATISTIK KETENAGALISTRIKAN 2022. Jakarta: Sekretariat Direktorat Jenderal Ketenagalistrikan.
Juliana, I. P., Weking, A. I., & Jasa, L. (2018). Pengaruh Sudut Kemiringan Head Turbin Ulir dan Daya Putar Turbin Ulir dan Daya Output Pada Pembangkit Listrik Tenaga Mikro Hidro. Majalah Ilmiah Teknologi Elektro, 17(3), 393-400. https://doi.org/10.24843/MITE.2018.v17i03.P14 .
Kusumanto, R., Nugraha, M. N., & Plant, I. M. (2023). Archimedes Screw Turbine Application on Portable. Jurnal Polimesin, 21(1), 88-92. Retrieved from : https://e-jurnal.pnl.ac.id/polimesin/article/view/3126/0.
Li, L., Lin, J., Wu, N., Xie, S., Meng, C., Zheng, Y., . . . Zhao, Y. (2022). Review and outlook on the international renewable energy development. Energy and Built Environment, 3, 139-157. https://doi.org/10.1016/j.enbenv.2020.12.002.
Muzaka, K., Pamuji, D. R., Wahid, M. A., Hadi, S., & Prasetyo, J. D. (2021). Effect of Archimedes Screw Turbine Shaft Inclination on Output Power. International Journal of Software & Hardware Research in Engineering (IJSHRE), 9(3), 83-86. DOI: 10.26821/IJSHRE.9.3.2021.9314.
Østergaard, P. A., Duic, N., Noorollahi, Y., Mikulcic, H., & Kalogirou, S. (2020). Sustainable Development Using Renewable Energy Technology. Renewable Energy, 146, 2430-2437. https://doi.org/10.1016/j.renene.2019.08.094.
Pritchard, P. J., & Leylegian, J. C. (2010). Fox and McDonald's Introduction to Fluid Mechanics (8th ed). New York: John Wiley & Sons.
Purece, C., & Corlan, L. (2021). Archimedean screw as fish-friendly turbines for harnessing hydropower potential. 10th International Conference on Thermal Equipments, Renewable Energy and Rural Development (TE-RE-RD 2021) (p. 286). Bucharest: EDP Sciences. https://doi.org/10.1051/e3sconf/202128602007 .
Rorres, C. (2000). The Turn of The Screw: Optimal Design of An Archimedes Screw. Journal of Hydraulic Engineering, 126(1), 72-80. DOI: 10.1061/(ASCE)0733-9429(2000)126:1(72).
Shahverdi, K., Loni, R., Ghobadian, B., Gohari, S., Marofi, S., & Bellos, E. (2020). Numerical Optimization Study of Archimedes Screw Turbine (AST): A case study. Renewable Energy, 145, 2130-2143. https://doi.org/10.1016/j.renene.2019.07.124.
Ubando, A. T., III, I. A., Peradilla, M. S., Sy, C. L., Calapatia, A. M., & Chen, W.-H. (2022). Sustainable Manufacturability of Archimedes Screw Turbines: A Critical Review. Journal of Manufacturing and Materials Processing, 6(6), 161. https://doi.org/10.3390/jmmp6060161.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Gad Gunawan, Cloudiandy Mukti Kimana, Doddy Suanggana, Alfian Djafar
This work is licensed under a Creative Commons Attribution 4.0 International License.
