Conveyor Belt Machine Maintenance Planning Using FMEA and RCM Methods at PT. SBM
DOI:
https://doi.org/10.70609/gtech.v9i2.6707Keywords:
Conveyor Belt, FMEA, RCM, Maintenance PlanningAbstract
PT. SBM is a bulk material handling company that focuses on conveyor maintenance and surface protection. The conveyor belt machine operates 24 hours non-stop resulting in damage to each component which disrupts the production process. So that an analysis is carried out using the FMEA method with the results of the calculation of the RPN value showing that the belt component gets an RPN value of 180, gear of 150, idler roller of 80, and chain of 80. RCM method to determine an effective maintenance strategy with the results of a new activity schedule, namely belt components must be checked and maintained about 4.36 hours/day once and idler rollers about 7.08 hours/day once by performing scheduled on-condition task maintenance activities. Gear must be checked and maintained about 4.12 hours/day once and chain about 0.23 hours/day once by performing scheduled discard task maintenance activities. By applying the results of this research in the company, it can determine a more effective and data-based maintenance schedule with increased machine reliability, maintenance schedule optimization, cost and operational efficiency, and implementation in the manufacturing industry. It is recommended that companies implement IoT-based monitoring systems, conduct training, and establish maintenance standards with periodic evaluation.
References
Andrianto, M. F., Sujatmiko, A., & Firmansyah, H. I. (2024). Perencanaan Perawatan Pada Mesin Crimping Manual Tipe 30 Dengan Metode RCM di Perusahaan Otomotif . Journal of Mechanical Engineering , 1 (4), 1-17.
Azhari, H., Ganap, J. G., & Nisah, F. A. (2024). Analisis Perawatan Mesin Kapal dengan Metode Reliability Centered Maintenance (RCM) di PT Jasa Armada Indonesia Tbk. Industrika , 8 (2), 407-417.
Bangun, A. D., Sinaga, G. A., Fadhilah, H., Hutabarat, H. G., & Sitorus, R. N. (2024). Analisis Penerapan Preventive Maintenance pada Pabrik Kelapa Sawit Menggunakan Metode Failure Mode and Effect Analysis (FMEA) dan Reliability Centered Maintenance (RCM). Talenta Conference Series: Energy and Engineering , 7 (1), 759-767.
Fahrurroji, M., Herwanto, D., & Nugraha, A. E. (2021). Usulan Perencanaan Perawatan Dengan Menggunakan Metode Reliability Centered Maintenance (RCM) di PT. Djabesmen. Jurnal Industry Xplore , 6 (2), 75-84.
Firmansyah, M., & Rizqi, A. W. (2024). Analysis of Machine Maintenance Using the Reliability Centered Maintenance (RCM) Method on the Bag Inserter (FLEXIM) Machine . G-Tech: Jurnal Teknologi Terapan , 8 (4), 2514-2521.
Gustiawan, M., & Affandi, N. (2021). Perencanaan Ulang Penjadwalan Perawatan Mesin Extruder Menggunakan Metode Reliability Centered Maintenance di PT. Staedter Indonesia. Jurnal Ilmiah Teknik dan Manajemen Industri , 1 (2), 134-270.
Harma, B., Yetrina, M., Susriyati, & Pebriyanto, R. (2024). Penelitian terhadap Perawatan pada Mesin Press Cap Roller dengan Metode FMEA dan RCM . Jurnal Teknologi , 14 (1), 20-25.
Hidayat, Jufriyanto, M., & Rizqi, A. W. (2021). Perancangan RCM (Reliability Centered Maintenance) Untuk Mengurangi Downtime Mesin Pembuat Botol (Studi Kasus PT IGLAS (Persero), Gresik) . Matrik , 21 (2), 157-164.
Huda, M. S., Tripariyanto, A. Y., & Komari, A. (2021). Perencanaan PredictiveDan Preventive MaintenancePada Pompa SWLP(Sea Water Lift Pump) Dengan Menggunakan Metode RCM (Reliability Centered Maintenance) Di Saka Indonesia Pangkah Limited. Jurmatis , 3 (1), 37-51.
Prasetyo, T. E. (2021). Penerapan Metode RCM (Reliability Centered Maintenance) Pada LP (Low Pressure) Flare Pump di Saka Indonesia Pangkah Limited. Malang: Universitas Islam Malang.
Purnomo, J., Affandi, N., & Rahmatullah, A. (2021). Analisis Penerapan Perawatan Motor Konveyor Mesin Xray Dengan Menggunakan Metode Reliability Centered Maintenance (RCM) Pada PT. Tristan Engineering. Jurnal Ilmiah Keilmuan Teknik dan Manajemen Industri , 1 (2), 154-169.
Putra, D. C., & Puspitasari, E. (2024). Analisis Manajemen Perawatan Mesin Produksi Kemasan Plastik Spout dengan Metode Reliability Centered Maintenance (RCM) . Juprit , 3 (3), 117-128.
Sastriawan, A. (2024). Penjadwalan Pemeliharaan Mesin Produksi Menggunakan Reliability Centered Maintenance . Jitekin , 14 (1), 26-35.
Simanungkalit, R. M., Suliawati, & Hernawati, T. (2023). AnalisisPenerapan Sistem Perawatan dengan Menggunakan Metode Reliability Centered Maintenance (RCM) pada Cement Mill Type Tube Mill di PT Cemindo Gemilang Medan. Jurnal Teknik , 2 (1), 72-83.
Sinaga, Z., Solihin, & Ardan, M. (2021). Perencanaan Perawatan Mesin Welding Mig Pada Produksi Sub Frame Di PT. XYZ Dengan Metode Reliability Centered Maintenance (RCM). Jktm , 6 (1), 26-38.
Supriyanto, H., Kurniati, N., & Supriyanto, M. F. (2021). Maintenance Performance Evaluation of an RCM Implementation: A Functional Oriented Case Study. International Journal of Mechanical Engineering and Robotics Research , 10 (12), 702-709.
Theresia, L., Ranti, G., Widianty, Y., & Stephani. (2023). Implementasi Lean Reliability Centered Maintenance (RCM) untuk Meningkatkan Keandalan Mesin: Studi Kasus PT Pelita Cengkareng Paper. Jurnal Iptek , 7 (2), 13-20.
Wibowo, T. J., Hidayatullah, T. S., & Nalhadi, A. (2021). Analisa Perawatan pada Mesin Bubut dengan Pendekatan Reliability Centered Maintenance (RCM) . Jurnal Rekayasa Industri , 3 (2), 110-120.
Wicaksono, N. R., & Rosady, S. D. (2024). Penerapan Metode Reliability Centered Maintenance (RCM) untuk Menentukan Strategi Perawatan Mesin Pencacah Sampah Organik. Mechanical Engineering , 1 (4), 1-15.
Yusuf, Y., Djamal, N., & Cahyadi, D. (2024). Forming machine maintenance planning using the reliability centered maintenance (RCM) method at PT. KHI pipe industries. Teknika , 20 (01), 105-110.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Fery Kurniawan, Akhmad Wasiur Rizqi
This work is licensed under a Creative Commons Attribution 4.0 International License.
