Work Accident Risk Analysis in Water Treatment Plant Laboratory of PT XYZ using JSA and HIRARC Methods
DOI:
https://doi.org/10.70609/g-tech.v9i4.8061Keywords:
Workplace Accidents, Job Safety Analysis, HIRARCAbstract
PT. XYZ produces fertilizers and chemicals for agro-industrial solutions. To maintain product quality, quality control is carried out in the water treatment laboratory. The increasing complexity of laboratory activities increases the risk of workplace accidents, such as inhaling reactive chemicals that can irritate the respiratory system and cause poisoning, or slipping while taking samples, which can cause injury. This study aims to analyze potential hazards and design control recommendations using the Job Safety Analysis (JSA) and Hazard Identification, Risk Assessment, and Risk Control (HIRARC) methods. Data were collected through interviews with employees and questionnaires assessing the likelihood and severity of hazards. The results of the study identified 12 potential hazards spread across 4 work activities. There were 2 very high-level hazards, 9 high-level hazards, and 1 moderate-level hazard. This study provides control recommendations to reduce risks, such as controls including the use of appropriate Personal Protective Equipment (PPE) etc., thereby supporting improved workplace safety at the PT. XYZ laboratory.
References
Abryandoko, E. W. (2018). Penilaian Risiko Keselamatan Dan Kesehatan Kerja Dengan Menggunakan Metode Hirarc Dan Safety Policy. Rekayasa Sipil, 12(1).
Afifudin, A. A. (2023). Implementasi Metode Job Safety Analysis SA Pada Evaluasi K3 Operator Produksi AS Hidrolis Di UD. AZ. https://jurnal.saburai.id/index.php/teknik/article/view/2146
Aisyah, A. P., & Dahlia, L. (2022). Enterprise Risk Management Berdasarkan ISO 31000 Dalam Pengukuran Risiko Operasional pada Klinik Spesialis Esti. Jurnal Akuntansi Dan Manajemen, 19(02), 78–90. https://doi.org/10.36406/JAM.V19I02.483
Al-Hammad, A., & Assaf, S. (1996). Assessment of Work Performance of Maintenance Contractors in Saudi Arabia. Journal of Management in Engineering, 12(2), 44–49. https://doi.org/10.1061/(ASCE)0742-597X(1996)12:2(44)
Alfiyah, C. Q., Yekti, A., Asih, P., Afridah, W., Hakim, A., & Fasya, Z. (2023). ANALISIS RISIKO KECELAKAAN KERJA DENGAN METODE FAILURE MODE AND EFFECT ANALYSIS PADA PEKERJA PROYEK KONTRUKSI: LITERATURE REVIEW. Jurnal Ilmu Psikologi Dan Kesehatan (SIKONTAN), 1(4), 283–290. https://doi.org/10.47353/SIKONTAN.V1I4.715
Azzahra, F., Purwati Nurlaili, E., & Dharmaputra Ratisan, J. (2022). Analisis Risiko Kerja Menggunakan Job Safety Analysis (JSA) Dengan Pendekatan Hazard Identification, Risk Assessment And Risk Control (Hirarc) di PT Indo Java Rubber Planting Co. Jurnal Agrifoodtech, 1(1), 2963–7422. https://jurnal2.untagsmg.ac.id/index.php/agrifoodtech
Faradillah, J. M., Rachmadhani, M. M., Kadang, D. R., Mahmud, F., & Amri, I. (2024). ANALISIS DAN EVALUASI MANAJEMEN RISIKO PADA USAHA LAUNDRY RUMAHAN MENGGUNAKAN METODE LIKELIHOOD DAN CONSEQUENCE RISK MATRIKS. Industrial Engineering Journal – System, 2(02), 54–66. https://doi.org/10.33506/SYSTEM.V2I02.3579
Hamdani, M. I., & Andesta, D. (2024). Analisis Potensi Bahaya Menggunakan Metode JSA dan HIRARC untuk Mengurangi Angka Kecelakaan Kerja pada Area Workshop Fabrikasi PT. ABC. G-Tech: Jurnal Teknologi Terapan, 8(2), 887–895. https://doi.org/10.33379/GTECH.V8I2.4076
Kyungsoo, S. S., Rahmahwati, C. A., & Faridah, F. (2023). Identifikasi Bahaya dan Risiko di Laboratorium SMKN 1 Tanah Luas Menggunakan Metode HIRA. Jurnal Teknologi, 23(2), 97–105. https://e-jurnal.pnl.ac.id/teknologi/article/view/4143
Prasetiyo, H., Poernomo, Y. C. S., & Candra, A. I. (2023). Analisis Identifikasi Potensi Bahaya Pada Pekerja dengan Menggunakan Metode Job Safety Analysis (JSA) dan HIRARC di Home Industri Emi Craft. Industrial Engineering System and Management Journal, 4(1), 19–31. https://doi.org/10.30737/JURMATEKS
Pratama, N. A., & Apsari, A. E. (2024). Analisis K3 Pada Aktivitas Pemotongan Ayam Dengan Menggunakan Metode JSA dan HIRARC | Jurnal Teknologi dan Manajemen Industri Terapan. Jurnal Teknologi Dan Manajemen Industri Terapan. https://jurnal-tmit.com/index.php/home/article/view/327
Purbarani, T.-I., & 2024, U. (n.d.). MENGGUNAKAN JOB SAFETY ANALYSIS (JSA) DENGAN PENDEKATAN HAZARD IDENTIFICATION, RISK ASSESSMENT, AND RISK CONTROL (HIRARC) …. Ejournal3.Undip.Ac.Id. Retrieved August 21, 2025, from https://ejournal3.undip.ac.id/index.php/ieoj/article/download/46712/31969
PUTRI SAKINAH, -. (2022). ANALISIS POTENSI BAHAYA DENGAN MENGGUNAKAN METODE JOB SAFETY ANALYSIS (JSA) PADA BAGIAN LOAD & HAUL PT. WIRA PENTA KENCANA KARIMUN, KEPULAUAN RIAU.
Saputra, M. A. Y., Fadillah, M. N., & Setiadi, D. (2021). APLIKASI CHECKLIST SAFETY BERBASIS MOBILE MENGGUNAKAN METODE JOB SAFETY ANALYSIS (JSA) UNTUK AUDIT KESEHATAN DAN KESELAMATAN KERJA (K3) DI PT.MATAHARI PUTRA PRIMA,TBK. JSI (Jurnal Sistem Informasi) Universitas Suryadarma, [Volume]([Nomor]), [Halaman Awal]-[Halaman Akhir]. https://doi.org/10.35968/JSI.V8I2.740
Saruni, C. V., Manoppo, F. J., & Sumayouw, M. D. J. (2025). Manajemen risiko pekerjaan prasarana sarana dan utilitas umum (PSU) jalan menggunakan metode severity index dan root cause analysis berbasis Python. PADURAKSA: Jurnal Teknik Sipil Universitas Warmadewa, 14(1), 46–59. https://doi.org/10.22225/PD.14.1.11297.46-59
Sertyaning Ari, I., Lukmandono, dan, Industri, T., & Teknologi Adhi Tama Surabaya, I. (2024). Integrasi Job Safety Analysis (JSA) dan Hazard Identification Risk Assessment and Risk Control (HIRARC) Guna Mencegah Risiko Kecelakaan Kerja. Prosiding SENASTITAN: Seminar Nasional Teknologi Industri Berkelanjutan, 4(0). https://ejurnal.itats.ac.id/senastitan/article/view/5327
Smarandana, G., Momon, A., & Arifin, J. (2021). PENILAIAN RISIKO K3 PADA PROSES PABRIKASI MENGGUNAKAN METODE HAZARD IDENTIFICATION, RISK ASSESSMENT AND RISK CONTROL (HIRARC). Jurnal INTECH Teknik Industri Universitas Serang Raya, 7(1), 56–62. https://doi.org/10.30656/intech.v7i1.2709
Triswandana, I. W. G. E., & Armaeni, N. K. (2020). Penilaian Risiko K3 Konstruksi Dengan Metode Hirarc. 4(1), 2581–2157. https://doi.org/10.30737/ukarst.v3i2
URROHMAH, D. S., & RIANDADARI, D. (2019). IDENTIFIKASI BAHAYA DENGAN METODE HAZARD IDENTIFICATION, RISK ASSESSMENT AND RISK CONTROL (HIRARC) DALAM UPAYA MEMPERKECIL RISIKO KECELAKAAN KERJA DI PT. PAL INDONESIA. Jurnal Pendidikan Teknik Mesin.
Widjaya, Y., & Mahbubah, N. A. (2022). Evaluasi Inspeksi Alat Pemadam Api Ringan Menggunakan Pendekatan Job Safety Analysis. Researchgate.Net. https://www.researchgate.net/profile/Nina-Mahbubah/publication/361253839_Evaluasi_Inspeksi_Alat_Pemadam_Api_Ringan_Menggunakan_Pendekatan_Job_Safety_Analysis/links/62a6b9a8a3fe3e3df872fe96/Evaluasi-Inspeksi-Alat-Pemadam-Api-Ringan-Menggunakan-Pendekatan-J
Wiryawan, M. R. (2024). Evaluasi Risiko Keselamatan dan Kesehatan Kerja Pada Proyek Instalasi Pipanisasi Di PT EFE Berbasis Metode JSA dan HIRARC. https://www.journal.unrika.ac.id/index.php/sigmateknika/article/view/6359
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Azumah Islahiyah, Moh. Jufriyanto
This work is licensed under a Creative Commons Attribution 4.0 International License.
