Analisis Pengendalian Kerusakan Kantong Pada Proses Pengantongan Pupuk ZA Plus dengan Metode SPC dan FMEA di PT. X
DOI:
https://doi.org/10.33379/gtech.v8i2.4124Keywords:
Defect, Fertilixer, FMEA, SPC, ZA PlusAbstract
PT. X is a subsidiary of a state-owned enterprise (BUMN), the most complete producer of fertilizers and chemicals in Indonesia. In addition to being engaged in services and logistics, PT X also produces and services bagging services for ZA Plus Fertilizer. The purpose of this research is to analyze the causes of bag defects in the ZA Plus fertilizer bagging process and determine the causes through the application of effective quality control using SPC and FMEA methods. The result of the SPC analysis is that there is still bag defect data that is out of control. While the results of the FMEA method analysis found that the most critical cause of defects is the frequent slip of the sewing needle, with an RPN value of 450. To overcome this problem, this study proposes to replace sewing machine equipment that is worn out regularly and on a scheduled basis.
References
Luthfi, A., Falah, N., Arief, K., & Sa’id Riginianto, R. (2023). Analisis Pengendalian Kualitas Pada Tempe Menggunakan Metode Seven Tools Dan FMEA. Jurnal Teknologi Dan Manajemen Industri Terapan (JTMIT), 2(3), 212–223.
Ningrum, H. F. (2019). Analisis Pengendalian Kualitas Produk Menggunakan Metode Statistical Process Control (SPC) Pada PT Difa Kreasi (Vol. 1, Issue 2). http://bisnisman.nusaputra.ac.id
Novaliansyah, P. P., Martharia, J., Silalahi, P., & Sukreni, T. (2023). Pengendalian Kualitas Dengan Metode Statistical Process Control (SPC) Pada Line Produksi Semi Solid. In Jurnal Kajian Ilmiah (Vol. 23, Issue 3). http://ejurnal.ubharajaya.ac.id/index.php/JKI
Nurmansyah, B. (2023). Jurnal Pendidikan Teknik Mesin Undiksha Analisis Downtime Paper Machine Menggunakan Metode FMEA untuk Menurunkan Cacat Sheet Break Analysis of Paper Machine Downtime Using the FMEA Method to Reduce Sheet Break Defects. 11. https://doi.org/10.23887/jptm.v11i1.56628
Oktavianus Pranata, V., & Putri, E. P. (2023). Pengendalian Kualitas Produk Coil Vapor Pada CV. ABC Dengan Menggunakan Statiscal Process Control. Jurnal Ilmiah Dan Karya Mahasiswa, 1(5), 108–118. https://doi.org/10.54066/jikma-itb.v1i5.767
Panahatan, S., Hutahaean, S., Uslianti, S., & Wahyudi, T. (2022). Pengendalian Kualitas Cpo Dan Kernel Di Pks Pt. Xyz Dengan Menggunakan Metode Statistical Process Control (SPC). In INTEGRATE: Industrial Engineering and Management System (Vol. 6, Issue 2). https://jurnal.untan.ac.id/index.php/jtinUNTAN/issue/view/
Setyo, N. R., Ratih, N. R., Niam, M. A., Ekonomi, F., Akuntansi, P., Islam, U., & Kediri, K. (2021). PENERAPAN METODE STATISTICAL PROSES CONTROL (SPC) DAN FAILURE MODE AND EFFECT ANALYSIS (FMEA) TERHADAP PENGENDALIAN KUALITAS PRODUK Oleh.
Simamora, Y., & Rumita, R. (2021). Pengendalian Kualitas Produksi Sir 20 Dengan Metode Statistical Process Control (Spc) Pada Pabrik DM (Studi Kasus PT Bridgestone Sumatra Rubber Estate).
Suseno, O., & Kalid, S. I. (2022). Pengendalian Kualitas Cacat Produk Tas Kulit Dengan Metode Failure Mode And Effect Analysis (Fmea) Dan Fault Tree Analysis (FTA) Di Pt Mandiri Jogja Internasional. In JCI Jurnal Cakrawala Ilmiah (Vol. 1, Issue 6). http://bajangjournal.com/index.php/JCI
Wardah, S., Suharto, S., & Lestari, R. (2022). Analisis Pengendalian Kualitas Proses Produksi Produk Nata De Coco Dengan Metode Statistic Quality Control ( Sqc ). Jisi: Jurnal Integrasi Sistem Industri, 9(2), 165. Https://Doi.Org/10.24853/jisi.9.2.165-175
Wicaksana, T., Tri Sunaryanto, L., Agribisnis, P., Pertanian dan Bisnis, F., & Kristen Satya Wacana Jalan Diponegoro No, U. (2021). Analisis Pengendalian Kualitas Produksi Susu Sapi Dengan Metode Statistical Process Control (Sc) Di Cv. Cita Nasional Analyzing The Quality Control Of Milk Production Using Statistical Process Control (SPC) Method In CV. CITA NASIONAL (Vol. 8, Issue 2).
Windi Belina Krestin, P. P. (2020). Usulan Perbaikan Kualitas Menggunakan Metode Failure Mode And Effect Analysis (Fmea) Pada Unit Produksi Sheeting Line Proses.
Wirawati, S. M. (2019). Analisis Pengendalian Kualitas Kemasan Botol Plastik Dengan Metode Statistical Process Control (SPC) DI PT. SINAR SOSRO KPB PANDEGLANG. In Jurnal InTent (Vol. 2, Issue 1).
Wulandari, M., & Setiafindari, W. (2023). Upaya Pengendalian Mutu Produk Menggunakan Metode Statistical Process Control Dan 5W+1H Di PT. Mitra Rekatama Mandiri. Jurnal Penelitian Rumpun Ilmu Teknik (JUPRIT), 2(3), 245–256. https://doi.org/10.55606/juprit.v2i3.2341
Yusuf, M. (2022). Analisis Kualitas Hasil Panen Lebah Dengan Metode Seven Tools Desa Pendarungan, Kecamatan Kabat, Kabupaten Banyuwangi. G-Tech: Jurnal Teknologi Terapan, 6(2), 265–275. https://doi.org/10.33379/gtech.v6i2.1697
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Muhammad Rofi'ul Ichsan, Moh. Jufriyanto, Akhmad Wasiur Rizqi
This work is licensed under a Creative Commons Attribution 4.0 International License.
