Analysis and Modelling of The Sroyo Village Composite Bridge Superstructure Based on SNI 1725:2016
DOI:
https://doi.org/10.70609/g-tech.v10i3.10588Keywords:
Manual Analysis, Modelling SAP2000, SNI 1725:2016, Sroyo Village Composite BridgeAbstract
This study aims to analyze, model and validate the superstructure of the Sroyo Village Composite Bridge to evaluate it structural safety while validating the manual calculating against computer-based modelling. The research method used is manual calculation analysis and computer-based structural modelling with SAP2000, in accordance with SNI 1725: 2016, RSNI T-03-2005 and SNI 2847: 2019. The results of the analysis show an ultimate moment of 991.25 kNm and an ultimate shear force of 304.60 kNm. This value is below the nominal moment capacity of 1365.57 kNm and nominal shear capacity of 648.00 kNm. The highest demand capacity ratio (DCR) is found in the shear connector at 0.98, while other internal force components can maintain safety control with a value of <1.00. The deflection that occurs is 12.36 mm which meets the allowable limit of 15.00 mm. Furthermore, validation of the results of manual analysis and SAP2000 modeling shows a minimum deviation of 0.07% and a maximum deviation of only 4.54% thus indicating the validity of the calculation results. Therefore, the superstructure of the Sroyo Village Composite Bridge is declared to meet structural feasibility according to Indonesian National Standards. However, this study is limited to the superstructure analysis.
References
Abzarih, A. W., Jembatan, P., & Sampai, W. (2025). Analisis Struktur Atas Jembatan Rangka Baja Kelas B40 Tipe Warren Truss di Kota Baubau. XIV(2), 85–96. https://doi.org/10.55340/jmi.v14i2.2004
Ardhi, R. F., Pertahanan, U., & Indonesia, R. (2026). ANALISIS PERILAKU LENDUTAN STRUKTUR BALOK GIRDER JEMBATAN RANGKA BAJA TIPE PRATT , WARREN , BALTIMORE , DAN K-TRUSS AKIBAT PEMBEBANAN SNI 1725 : 2016 DAN SNI 2833 : 2016 Analysis of the Deflection Behavior of Pratt , Warren , Baltimore , and K- Truss Steel Truss Bridge Girder Structures under Loading in Accordance with SNI 1725 : 2016 and SNI 2833 : 2016. 05(April).
Bengkalis, P. N. (2021). Seminar Nasional Industri dan Teknologi (SNIT), Politeknik Negeri Bengkalis. 2016, 21–28.
Fauzan, M., Hadi, Y., Alghiffary, R., & Junianda, G. (2025). Analisis dan desain modifikasi jembatan rangka busur baja dengan fluid viscous damper menggunakan SAP2000. 8(2), 73–87.
Hamzah, & Basir, N. (2024). ANALISA PEMBEBANAN JEMBATAN MENGGUNAKAN SOFTWARE SAP2000(Studi Kasus: Jembatan Panglima Sampul. Kec. Tebing Tinggi. Kab. Kepulauan Meranti ). Jurnal TeKLA, 6(2), 135–143. https://doi.org/10.35314/tekla.v6.i2.76
Harmono, D., Irawan, R., Sutrisno, W., Studi, P., Sipil, T., Teknik, F., & Tamansiswa, U. S. (2005). AKSES PULAU BALANG I MENGGUNAKAN.
Ilmiah, J., Teknik, F., & Lampung, U. (2021). REKAYASA Jurnal Ilmiah Fakultas Teknik Universitas Lampung. 25(April), 1–4.
Laia, A. P. (2021). Evaluasi Perencanaan Struktur Atas Jembatan Sei Wampu Kecamatan Stabat. Jurnal Ilmiah Teknik Sipil, 10(1), 110–119.
Momot, R. M., Zulaicha, L., & Momot, R. M. (2026). Penerapan Struktur Komposit Sederhana Sebagai Pengganti PCI pada Jembatan Basin Application of Simple Composite Structures as a Replacement for PCI on Basin Bridges. 7(1), 1–12.
Mu, A., & R, J. A. P. (2021). JEMBATAN KOMPOSIT DIREKTORAT BINA MARGA BENTANG JEMBATAN 20 METER SESUAI DENGAN SNI PEMBEBANAN 2016. 3(2), 72–80.
Nabiilah, P., Azizi, A., & Wibowo, M. A. (2025). Analisis Lendutan pada Struktur Pelat Lantai Jembatan Tajum Karang Bawang Banyumas Deflection Analysis on the Floor Slab Structure of the Tajum Karang Bawang Bridge in Banyumas. 6(1), 7–12.
Nurwahidah, A. (2026). Comparative Evaluation of the Structural Response of Multi-Story Buildings Using the Finite Element Method and Manual Calculations Evaluasi Komparatif Respons Struktur Bangunan Bertingkat Menggunakan Metode Elemen Hingga Dan Perhitungan Manual. 3(1), 1–7.
Ode, S., & Frans, P. L. (2026). Analisis struktur rangka baja jembatan wai teba dengan metode lrfd di buru selatan. 4(5).
Prasetyo, D. A. W. (2018). Perencanaan Struktur Jembatan Composite Di Desa Kebunagung. 10–27. https://jst.ejournal.unri.ac.id/index.php/JST/article/view/3992
Rasita, I., Maydikta, R., Apriliani, D., Agustin, M., & Halim, A. (2026). Dampak keterlambatan perbaikan jembatan pendem terhadap mobilitas dan aktivitas masyarakat di kecamatan jati agung kabupaten lampung selatan. 03, 8–15.
Romadon, K., & Nuranita, B. (2024). Evaluasi Kapasitas Struktur Atas Jembatan Eksisting Callender Hamilton Tajum II Margasana Berdasarkan Standar Pembebanan SNI 1725 : 2016. 515–520.
Sapulete, C. A. (2020). ANALISIS PEMBEBANAN JEMBATAN MENGGUNAKAN STANDAR PEMBEBANAN SNI 1725 : 2016 ( STUDI KASUS : JEMBATAN DI KABUPATEN PEGUNUNGAN ARFAK ). 9(1), 24–30.
Sartika, D., Herbudiman, B., & Pribadi, A. (2019). Studi Komparasi Pembebanan Analisis Jembatan Cibaruyan dengan Pembebanan Jembatan Berdasarkan RSNI T-02-2005 dan SNI 1725 : 2016. 5(4).
Solissa, R. A., Frans, P. L., Daniel, D., & Huwae, M. (2026). Analisis Struktur Bangunan Atas Jembatan Wai Dua Negeri Urimesing Dusun Seri Kecamatan Nusaniwe Kota Ambon. 2(8), 1399–1408.
Sumajouw, M. D. J., Pandaleke, R., Teknik, F., Sipil, J. T., Sam, U., & Manado, R. (2017). BALOK KOMPOSIT BAJA MENGGUNAKAN FLOOR DECK. 5(9), 579–590.
Syafri, T., Ninoy, M., Ola, L., Buttomi, M., & Adnan, S. (2026). Scale Journal of Civil Engineering TEKNIS. 03(01), 1–12.
Tumimomor, M. E., Dapas, S. O., & Mondoringin, M. R. I. A. J. (2016). ANALISIS PENGHUBUNG GESER ( SHEAR CONNECTOR ) PADA BALOK BAJA DAN PELAT BETON. 4(8), 461–470.
Widiyanto, W. E. (2024). Perencanaan struktur jembatan gelagar dengan tipe beam bridge. 1(1), 19–33.
Wulandari dan Sasongko, J. (2023). Research Article Studi Alternatif Perencanaan Jembatan Komposit. Indo Green Journal, 1, 105–112. https://idngreen.com/index.php/green
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Bryan Septian Ari Pratama, Annisa' Carina, Donny July Prasetyo
This work is licensed under a Creative Commons Attribution 4.0 International License.
