Pengoptimalan Waktu Terhadap Hasil Adukan Pada Alat Pengaduk Bahan Dasar Sabun Cair
DOI:
https://doi.org/10.33379/gtech.v7i1.1867Keywords:
Electric motor, pulley, beltAbstract
The liquid soap base mixing machine is a machine whose working principle utilizes power from an electric motor and is transmitted to the pulley and v-belt mechanism. The power generated by the electric motor will be transferred to the shaft which is connected to the stirring rod. Pulleys and belts are a pair of machine elements used to transmit power from one shaft to another. The speed ratio between the drive shaft and the driven shaft depends on the diameter of the driven pulley.
References
Ahya, R., Prasetyo, R., Sari, M. P., & Lestari, M. S. (2021). Rancang Bangun Mesin Pengaduk Sabun Cuci Cair Untuk Mengoptimalkan Waktu Produksi Pada Industri Rumah Tangga. Jurnal Inkofar, 5(1), 50–59. https://doi.org/10.46846/jurnalinkofar.v5i1.196
Aryza, S., Irwanto, M., Khairun Nizam, W., Lubis, Z., Putri, M., Ramadhan, A., Nova Hulu, F., Wibowo, P., Novalianda, S., & Rahim, R. (2018). An Effect Sensitivity Harmonics of Rotor Induction Motors Based On Fuzzy Logic. International Journal of Engineering & Technology, 7(2.13), 418–420. https://doi.org/10.14419/ijet.v7i2.13.16936
Boentarto, D. (1999). Teknik Sepeda Motor. CV. Aneka.
Nelson Serarawani, P. (2020). Pengembangan Perancangan Alat Mixing Sabun Cair Yang Sesuai Kaidah Ergonomi. Jurnal Valtech, 3(1), 75–83. https://ejournal.itn.ac.id/index.php/valtech/article/view/2454
Ramadhan, A., Amalia, S., F Silalahi, F., Situmorang, J., Syahramlan, Tampone, Y., & Aryza, S. (2019). Perancangan Dan Implementasi Field Oriented Control (FOC) dan PID Di dalam Koordinasi Kecepatan Motor Induksi Tiga Phasa. In Mesran (Ed.), Seminar Nasional Teknologi Komputer & Sains (SAINTEKS) (pp. 187–191).
Samhuddin, S., Hasbi, M., & Jamiluddin, J. (2018). Perencanaan Sistem Transmisi Alat Peniris Pada Mesin Pengering Helm. Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin, 3(1), 1–7. https://doi.org/http://dx.doi.org/10.55679/enthalpy.v3i1.3629
Wahyu, N., Aidi Ariyanto, N., & Syarifudin. (2021). Pengaruh Variasi Diameter Puli Terhadap Konsumsi Bahan Bakar Mesin Disk Mill Ffc 15 [Politeknik Harapan Bersama]. https://eprints.poltektegal.ac.id/725/
Widyasanti, A., Septianur, A. S., & Rosalinda, S. (2019). Pembuatan Sabun Cair dengan Menggunakan Bahan Baku Minyak Jarak (Castor Oil) dengan Variasi Konsentrasi Infused Oil Teh Putih (Camellia sinensis). Jurnal Teknologi Dan Industri Pertanian Indonesia, 11(1), 11–18. https://doi.org/10.17969/jtipi.v11i1.12970
Widyasanti, A., Winaya, A. T., & Rosalinda, S. (2019). Pembuatan Sabun Cair Berbahan Baku Minyak Kelapa Dengan Berbagai Variasi Konsentrasi Ekstrak Teh Putih. AGROINTEK, 13(2), 132–142. https://doi.org/10.21107/agrointek.v13i2.5102
Zuber, M. (2020). Rancang Bangun Alat Pengaduk Sabun Cair Bahan Baku Minyak Serai Wangi. TRANSMISI, 16(2), 86–93. https://doi.org/10.26905/jtmt.v16i2.4827
Downloads
Published
Issue
Section
License
Copyright (c) 2023 Rahmadsyah , Andri Ramadhan, Moraida Hasanah , Soleh Solahuddin
This work is licensed under a Creative Commons Attribution 4.0 International License.
