Analisis Kestabilan Proses Manufaktur Part Body Mobil
DOI:
https://doi.org/10.33379/gtech.v7i2.2034Keywords:
Kestabilan Proses, SPC , ManufakturAbstract
This research aims to control the stability of the manufacturing process part body car. Product problems do not meet standards due to unstable welding process. This is evidenced by the dimensional check point having a Cpk value < 1.33. The root of the problem is the process of repairing component production tool spart not up to standard. Improvements that have been made to the process welding namely setting the cup tip regularly, adding a gun guide. Apart from that do predictive maintenance is indispensable. While repairs on stamping press, namely setting stamping machine parameters and conducting 3D simulations before manufacturing.The improvements that have been made by the company show an increase in process stability. There are 7 stable inspection points (Cpk > 1.33) and 1 unstable inspection point (Cpk < 1.33). Process monitoring process i.e. process inspection at the beginning, middle, end. In addition to updating the Cpk value, updating the checksheet data maintenance. The preventive maintenance necessary to maintain stable engine performance.
References
Addawiyah, A. S & Rudatin, W., (2016). Pengembangan Risk Assessment dalam Evaluasi Manajemen Penanggulangan Kebakaran Melalui Fault Tree Analysis, Unnes Journal of Public Health, (5)1, 36 – 47.
Arciadiacono, G & Nuzzi, S., (2017). A Review of Fundamentals on Process Capability, Process Performance and Process Sigma and A Introduction to Process Sigma Split. International Journal of Applied Engineering Research, (12) 14, 4666 – 4570.
Benneyan, J. C., Lloyd, L.C & Plsek, P.E., (2003). Statistical Process Control As A Tool for Research and Healthcare Improvement. Qual Saf Health Care. (12)1, 458 – 464.
Chen, M. S., Wu, M. H & Lin, C, M., (2014). Application Indies Cp an Cpk to Improve Quality Control Capability in Clinical Biochemistry Laboratories. Chinese journal of Physiology, 57(2), 63 – 68.
Chesher, D. & Burnett, L., (1997). Equivalence of Critical Error Calculations and Process Capability Index Cpk. Clin. Chem. 43(6), 1100-1101.
Costa, L. B. M., Godinho Filho, M., Fredendall, L. D., & Paredes, F. J. G., (2018). Lean, Six Sigma And Lean Six Sigma in The Food Industry: A Systematic Literature Review. Trends in Food Science & Technology, 82, 122-133.
Kane, V. E., (1986). Process Capability Indices. Journal of Quality Technology, 18(1), 41 – 52.
Korenko, M., Kaplik, P., Bujna, M & Pristavka, M., (2013). Statistical Process Control in Automotive Industry. Acta Technologica Agriculturae, (2), 39 – 42.
Kotz, S & Johnson, N. L. (1993). Process Capability Indies. London: Chapman and Hall.
Madhani, P. M., (2020). Performance Optimisation of Retail Industri : Lean Six Sigma Appoarch. ASBM Journal of Management, 13(1), 74 – 91.
Madiana, A.A., (2022). Process Capability Analysis for Quality Control at The Mixing Stage of Animal Feet Product at PT. Gold Coin Indonesia. TRIGIN Publisher, (10)4, 170 – 179.
Muzahir, A., Sinaga, Z & Yusanto, A. A., (2020) Analisis Penurunan Defect Pada Proses Manufaktur Komponen kendaraan Bermotor dengan Mode Failure Mode And Effect Analysis. Jurnal Kajian Teknik Mesin, (5)2, 66 – 77.
Pangestu, P & Fahma, F., (2018). Implementasi Six Sigma dalam Peningkatan Kulitas Proses Produksi LED TV di PT. Sharp Electronic Indonesia, Performa: Media Ilmiah Teknik Industri, 17(2), 152 – 164.
Puspitasari, N. B & Martanto, A., (2014). Penggunaan FMEA dalam Mengidentifikasi Risiko Kegagalan Proses Produksi Sarung ATM Alat Tenun Mesin. J@TI Undip, 9(2), 93 – 98.
Puteri, R.A.M & Ramadhon, M.S., (2016). Meningkatkan Kapasitas Loading Mesin Press 1000T pada Proses Press Bracket Support Air Tank dengan Metode PDCA di PT. XYZ. Jurnal Teknologi, (8) 1, 39 – 44.
Sinurat, Y. H., Marno & Santosa, A., (2022). Mempelajari Proses Produksi Checking Fixture (CF) Panel Unit dengan Studi kasus di PT. Fadira Teknik. Jurnal Ilmiah Wahana Pendidikan. 8(2), 84 – 89.
Widodo, A & Soediantono, D., (2022). Benefit of Six Sigma Method (DMAIC) and Implementation Suggestion in The Defense Industry: Literature Review, International Journal of Social and Management Studies (IJOSMAS), (3)3, 1 – 12.
Downloads
Published
Issue
Section
License
Copyright (c) 2023 Muhammad Miftahul Abid
This work is licensed under a Creative Commons Attribution 4.0 International License.
