Pembuatan Produk Prototype Roda Gigi Menggunakan 3D Printing
DOI:
https://doi.org/10.33379/gtech.v8i3.4461Keywords:
prototype, gear, 3D PrintingAbstract
Technology 3D Printing used to manufacture machine spare parts products to help maintenance (maintenance). Previous process maintenance took a long time (> 4 days), because we were waiting for samples of gear parts to be made from the vendor. The aim of this research is to make a product prototype gears and fast processing time by determining ideal parameters. This research uses the method Multimedia Development Life Cycle which consists of three stages. Stage 1: concept creation (concept) and Planning (design); In level 2: collection of materials and manufacturing of products and level 3: testing and distribution. This research involved two printing experiments using parameters fill density and layer height. Product printouts prototype with parameters fill density resulting in a fill density of 60% and layer height 0.1 mm shows better strength, so it doesn't break. Printing process with layer height 0.1 takes 228 minutes, so product production is faster than before, four days, so the maintenance process is faster than before.
Keywords :
prototype, gear, 3D printing
References
Cahyati, S., & Furqon, Y. Al. (2022). the Layer Height Variations Effect on Tensile Strength of 3D Printing Product Pla Material Based. Jurnal Rekayasa Mesin, 13(3), 647–657. https://doi.org/10.21776/jrm.v13i3.823
Civilization, I., TEMA 19, & Domenico, E. (2021). No 主観的健康感を中心とした在宅高齢者における 健康関連指標に関する共分散構造分析Title. 2(10), 6.
Gunawan, R. (2020). Pengaruh Densitas Isi terhadap Ketelitian Dimensi pada Produk Mesin 3D Printing. Mesin, 11(1), 15–19. https://doi.org/10.25105/ms.v11i1.7438
Izhardas, J. M., & Lubis, S. (2023). PEMANFAATAN 3D PRINTING UNTUK PEMBUATAN PEMEGANG TOOLS DI WORKSHOP GO KART pembuatan prototype ataupun produk dapat dilakukan dengan mudah , cepat dan secara detail . 3D mencetak di bidang alat-alat peraga untuk : ( a ) pendidikan ; ( b ) model perhiasan . 1(1), 27–34.
Kartadipura, R. H. (2013). Analisis Pemilihan Material Beton Dan Material Baja Sebagai Alternatif Material Pengganti Kayu Ulin. Jurnal Teknik Sipil, 2(3), 237–246.
Kyratsis, P., Gabis, E., Tzotzis, A., Tzetzis, D., & Kakoulis, K. (2019). CAD based product design: A case study. International Journal of Modern Manufacturing Technologies, 11(3 Special Issue), 110–115.
Lubis, G. S., Taufiqurrahman, M., & Ivanto, M. (2021). Analisa Pengaruh Parameter Proses Terhadap Uji Tarik Produk Hasil 3D Printing Berbahan Polylatic Acid. Jurnal Engine: Energi, Manufaktur, Dan Material, 5(2), 39. https://doi.org/10.30588/jeemm.v5i2.877
Lubis, S. Y., Riza, A., Wijaya, A. H., & Ariyanti, S. (2023). Optimasi Parameter 3D Printing Terhadap Kualitas Produk Bahan Acrylonitrile Butadiene Styrene. Jurnal PASTI (Penelitian Dan Aplikasi Sistem Dan Teknik Industri), 17(1), 58. https://doi.org/10.22441/pasti.2023.v17i1.006
Msallem, B., Neha, S., Shuaishuai, C., Halbeisen, F. S., & Hans-Florian Zeilhofer, F. M. T. (2020). Evaluation of the Dimensional Accuracy of 3D-Printed Anatomical Mandibular Models Using. Journal of Clinical Medicine, 9(3), 1–18.
Prasetyo, E., Hermawan, R., Ridho, M. N. I., Hajar, I. I., Hariri, H., & Pane, E. A. (2020). Analisis Kekuatan Rangka Pada Mesin Transverse Ducting Flange (TDF) Menggunakan Software Solidworks. Rekayasa, 13(3), 299–306. https://doi.org/10.21107/rekayasa.v13i3.8872
Sathishkumar, N., Udayakumar, A. S. M., Vincent, B., & Ashok Kumar, V. (2020). Study and Analysis of 3D Printed FDM Components by Non-Destructive Testing Techniques. International Journal of Research and Review (Ijrrjournal.Com), 7(5), 5.
Subandi, H. (2021). Augmented Reality dalam Mendeteksi Produk Rotan menggunakan Metode Multimedia Development Life Cycle ( MDLC ). 6(2), 135–141.
Utami, M., Zalianti, R., Utami, P. K., & Adha, M. A. (2022). Pengaruh Kualitas Produk, Desain Produk, Dan Harga Produk Terhadap Kepuasan Pembelian Konsumen Brand Appel Iphone. Jurnal Ekonomi Dan Manajemen, 2(1), 24–30. https://doi.org/10.56127/jekma.v2i1.406
Welander, T., & Amin, N. (2018). G-code Modeling for 3D Printer Quality Assessment. https://www.researchgate.net/publication/331688882
Widyastuti, P. A. (2020). Pembelajaran 3D Printing sebagai metode perancangan produk kostum (Studi Kasus: industri cosplay). Productum: Jurnal Desain Produk (Pengetahuan Dan Perancangan Produk), 3(7), 231–238. https://doi.org/10.24821/productum.v3i7.3378
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Muhammad Miftahul Abid, Wahyu Sidiq Saputra, Arya Beta Ash Shidik
This work is licensed under a Creative Commons Attribution 4.0 International License.
