The Design of a Non Contact Body Temperature Measurement Tool Equipped with an Automatic Hand Sanitizer Dispenser

Authors

  • Sepannur Bandri Institut Teknologi Padang, Indonesia
  • Rafika Andari Institut Teknologi Padang, Indonesia
  • Andi Muhammad Nur Putra Institut Teknologi Padang, Indonesia
  • Anggun Kemala Institut Teknologi Padang, Indonesia
  • Zuriman Anthony Institut Teknologi Padang, Indonesia

DOI:

https://doi.org/10.33379/gtech.v8i1.3519

Keywords:

fuzzy logic, hand sanitizer, temperature, ultrasonic

Abstract

Body temperature measurements in certain hospitals still rely on Thermogun alongside the manual use of hand sanitizers. However, this manual approach is considered inefficient due to the repeated touching of its upper handle, which increases the risk of virus transmission among visitors. Therefore, the objective of this research is to transform the Thermogun into a contactless human body temperature measuring device, equipped with an automatic hand sanitizer dispenser and a hand sanitizer residue detector. This tool will utilize fuzzy logic algorithms to enhance accuracy, efficiency, and cost-effectiveness in temperature measurement. The design of this tool will incorporate a non-contact body temperature sensor like MLX9016, with an Infrared sensor serving as a trigger for temperature readings. Consequently, it is anticipated that the results of this research will yield a more sophisticated, responsive, and still accurate temperature measurement solution through the utilization of the MLX90614 temperature sensor.

References

Asrul, A., Sahidin, S., & Alam, S. (2021). Mesin Cuci Tangan Otomatis Menggunakan Sensor Proximity dan DFPlayer Mini Berbasis Arduino Uno. Jurnal Mosfet, 1(1), 1–7. https://doi.org/10.31850/jmosfet.v1i1.633.

Aziz, G. J. H., Sidhiq, A. F., Pratama, J. C., & Samsugi, S. (2021). Rancang Bangun Alat Otomatis Hand Sanitizer Dan Ukur Suhu Tubuh Mandiri Untuk Pencegahan Covid-19 Berbasis Arduino Uno. Jurnal Ilmiah Mahasiswa Kendali Dan Listrik, 2(1), 78–84.

Bait, R. Y., Fahmi, I., & Boesday, L. F. (2023). Desain Alat Dispenser Hand Sanitizer Otomatis Menggunakan Sensor Ultrasonic Berbasis Arduino Nano. Jurnal Spektro, 6(1), 31–38.

Harahap, S. H. (2017). Pemanfaatan Aplikasi Penggambar Diagram Alir (Flowchart) sebagai Bahan Ajar untuk Mata Kuliah Sistem Akuntansi di Fakultas Ekonomi pada Perguruan Tinggi Swasta di Kota Medan. Kitabah, I, 14.

Muddin, S., Rosmiati, Yusri, Y., & Dewi. (2022). Pengembangan Alat Hand Sanitizer Dan Pengukur Suhu Tubuh Otomatis Berbasis Arduino. Jurnal Teknologi Dan Komputer (JTEK), 2(01). https://doi.org/10.56923/jtek.v2i01.59.

Rizky, A., Fauzi, A., & Maulana, A. (2021). Implementasi Alat Otomatis Hand Sanitizer Dan Ukur Suhu Tubuh Mandiri Berbasis Internet Of Things. Jurnal Infortech, 3(1), 79–84. https://doi.org/10.31294/infortech.v3i1.10521.

Romadhon, M. E., Indra, J., & Novita, H. Y. (2023). Implementasi Fuzzy Logic Tsukamoto pada Deteksi Kondisi Badan Berdasarkan Suhu Tubuh. Scientific Student Journal for Information, Technology and Science, 4(1), 57–65.

Sari, P. N., Siambaton, M. Z., & Haramaini, T. (2022). Penerapan Algoritma Fuzzy Logic Pada Sistem Pengukur Suhu Tubuh Manusia dan Hand Sanitizer Berbasis Arduino Uno R3 dengan Menggunakan Sensor Proximity. Journal of Information System Research (JOSH), 3(4), 472–475. https://doi.org/10.47065/josh.v3i4.1874.

Sari, W., & Rasyid, R. (2021). Rancang Bangun Sistem Termometer Inframerah dan Hand Sanitizer Otomatis untuk Memutus Rantai Penyebaran Covid-19. Jurnal Fisika Unand, 10(1), 76–82. https://doi.org/10.25077/jfu.10.1.76-82.2021.

Syahputra, M. I., Khair, U., & Sembiring, A. (2021). Sensor-based Asrul, A., Sahidin, S., & Alam, S. (2021). Mesin Cuci Tangan Otomatis Menggunakan Sensor Proximity dan DFPlayer Mini Berbasis Arduino Uno. Jurnal Mosfet, 1(1), 1–7. https://doi.org/10.31850/jmosfet.v1i1.633.

Aziz, G. J. H., Sidhiq, A. F., Pratama, J. C., & Samsugi, S. (2021). Rancang Bangun Alat Otomatis Hand Sanitizer Dan Ukur Suhu Tubuh Mandiri Untuk Pencegahan Covid-19 Berbasis Arduino Uno. Jurnal Ilmiah Mahasiswa Kendali Dan Listrik, 2(1), 78–84.

Bait, R. Y., Fahmi, I., & Boesday, L. F. (2023). Desain Alat Dispenser Hand Sanitizer Otomatis Menggunakan Sensor Ultrasonic Berbasis Arduino Nano. Jurnal Spektro, 6(1), 31–38.

Harahap, S. H. (2017). Pemanfaatan Aplikasi Penggambar Diagram Alir (Flowchart) sebagai Bahan Ajar untuk Mata Kuliah Sistem Akuntansi di Fakultas Ekonomi pada Perguruan Tinggi Swasta di Kota Medan. Kitabah, I, 14.

Muddin, S., Rosmiati, Yusri, Y., & Dewi. (2022). Pengembangan Alat Hand Sanitizer Dan Pengukur Suhu Tubuh Otomatis Berbasis Arduino. Jurnal Teknologi Dan Komputer (JTEK), 2(01). https://doi.org/10.56923/jtek.v2i01.59.

Rizky, A., Fauzi, A., & Maulana, A. (2021). Implementasi Alat Otomatis Hand Sanitizer Dan Ukur Suhu Tubuh Mandiri Berbasis Internet Of Things. Jurnal Infortech, 3(1), 79–84. https://doi.org/10.31294/infortech.v3i1.10521.

Romadhon, M. E., Indra, J., & Novita, H. Y. (2023). Implementasi Fuzzy Logic Tsukamoto pada Deteksi Kondisi Badan Berdasarkan Suhu Tubuh. Scientific Student Journal for Information, Technology and Science, 4(1), 57–65.

Sari, P. N., Siambaton, M. Z., & Haramaini, T. (2022). Penerapan Algoritma Fuzzy Logic Pada Sistem Pengukur Suhu Tubuh Manusia dan Hand Sanitizer Berbasis Arduino Uno R3 dengan Menggunakan Sensor Proximity. Journal of Information System Research (JOSH), 3(4), 472–475. https://doi.org/10.47065/josh.v3i4.1874.

Sari, W., & Rasyid, R. (2021). Rancang Bangun Sistem Termometer Inframerah dan Hand Sanitizer Otomatis untuk Memutus Rantai Penyebaran Covid-19. Jurnal Fisika Unand, 10(1), 76–82. https://doi.org/10.25077/jfu.10.1.76-82.2021.

Syahputra, M. I., Khair, U., & Sembiring, A. (2021). Sensor-based automatic hand sanitizer dispenser. ALGORITMA: Jurnal Ilmu Komputer Dan INformatika, 14(5), 543–546. https://doi.org/10.4103/mjdrdypu.mjdrdypu_221_20.

Wulandari, R. (2020). Rancang Bangun Pengukur Suhu Tubuh Berbasis Arduino Sebagai Alat Deteksi Awal Covid-19. Prosiding SNFA (Seminar Nasional Fisika Dan Aplikasinya), 5, 183–189. https://doi.org/10.20961/prosidingsnfa.v5i0.46610.

automatic hand sanitizer dispenser. ALGORITMA: Jurnal Ilmu Komputer Dan INformatika, 14(5), 543–546. https://doi.org/10.4103/mjdrdypu.mjdrdypu_221_20.

Wulandari, R. (2020). Rancang Bangun Pengukur Suhu Tubuh Berbasis Arduino Sebagai Alat Deteksi Awal Covid-19. Prosiding SNFA (Seminar Nasional Fisika Dan Aplikasinya), 5, 183–189. https://doi.org/10.20961/prosidingsnfa.v5i0.46610.

Published

2023-12-22

How to Cite

The Design of a Non Contact Body Temperature Measurement Tool Equipped with an Automatic Hand Sanitizer Dispenser. (2023). G-Tech: Jurnal Teknologi Terapan, 8(1), 54-65. https://doi.org/10.33379/gtech.v8i1.3519

Most read articles by the same author(s)