Yield and Quality of Concentrated Latex with a Combination of Vibratory and Processing Technology
DOI:
https://doi.org/10.33379/gtech.v8i1.3785Keywords:
Lateks pekat, Penggetaran, Pemisahan lateksAbstract
Concentrated latex is a processed natural rubber product with a dry rubber content of 60-64%. Making concentrated latex by centrifugation requires investment in expensive equipment, while making concentrated latex by creaming takes a long time, around 2-3 weeks. One way to speed up the production of concentrated latex is by using a simple tool, namely an orbital vibrator. This research used a Randomized Block Design with 2 factors. Factor I is Vibration Time (V) and factor II is creaming Time (T). The results of the research showed that the length of shaking and creaming time in making concentrated latex had an influence on the yield and quality of concentrated latex except for the pH value, but there was no interaction between these two factors. The quality of concentrated latex that meets ISO 2004 standards is pH (10.1-10.83) and WKM (564.33-618.17 seconds) while KKK (53.74 - 57.64%) and KJP (50.58 – 53.29 %), not yet meeting ISO 2004 standards.
References
Afreen, S., Haque, K. R., & Huda, M. K. (2013). Troubleshooting for the observed problems in processing latex concentrate from natural resource. IOP Conference Series: Earth and Environmental Science, 16(1), 5–9. https://doi.org/10.1088/1755-1315/16/1/012007
Aji, G. K., Purwanto, D., & Rivai, M. (2019). Pengendali Kecepatan pada Alat Sentrifugasi Menggunakan Metode Logika Fuzzy. Jurnal Teknik ITS, 7(2). https://doi.org/10.12962/j23373539.v7i2.31914
Jannah, A. (2021). Pengaruh Dosisi Larutan Tepung Iles-iles terhadap Kualitas Lateks Pekat Dengan metode Pendadihan. Politeknik Negeri Lampung.
Junaidi, Wijaya, A., Rachmawan, A., & Andriyanto, M. (2019). Total Solid Content and Compound Properties from Different Collection Time of Hevea brasiliensis Latex. Acta Technologica Agriculturae, 22(4), 104–108. https://doi.org/10.2478/ata-2019-0019
Kamal, N. (2010). Pengaruh Bahan Aditif Cmc ( Carboxyl Methyl Cellulose ) Terhadap Beberapa Parameter Pada Larutan Sukrosa. Jurnal Teknologi, I(17), 78–85.
Marsongko, M. (2013). Perbandingan Pembuatan Sarung Tangan Dari Lateks Alam Yang Divulkanisasi Radiasi Dan Belerang. Jurnal Kimia Dan Kemasan, 35(2), 131. https://doi.org/10.24817/jkk.v35i2.1885
Maryanti, & Delvitasari, F. (2021). The Effect of Type of Vibration to the Quality of Concentrate Latex on the Creaming Process. IOP Conference Series: Earth and Environmental Science, 1012(1). https://doi.org/10.1088/1755-1315/1012/1/012078
Maspanger, D. R. (2007). Pembuatan Lateks Dadih Dengan Proses Sentrifugasi Putaran Rendah dan Kualitas Barang Jadi Karetnya. Preparation of Creamed Latex by Low Speed Centrifugation Process and the Quality of its Rubber Product. Agritech, 27(3), 124–129.
Novendra, R. (2021). Pengaruh Kombinasi Dosis Carboxymethyl Cellulose (CMC) Pada Proses Pendadihan dan Waktu Sentrifugasi Pada Pembuatan Lateks Pekat. Politeknik Negeri Lampung.
Nurhayati, C., & Andayani, O. (2015). Pengolahan Lateks Pekat Proses Dadih Menggunakan Garam Alginat Hasil Ekstraksi Rumput Laut Untuk Produk Busa Treatment Process Concentrated Latex Curd Using the Extraction of Salt Alginate Seaweed for Foam Rubber Products. 49–58.
Prastanto, H., Falaah, A. F., & Maspanger, D. R. (2014). Pemekatan Lateks Kebun Secara Cepat Dengan Proses Sentrifugasi Putaran Rendah. Jurnal Penelitian Karet, 32(2), 181–188. https://doi.org/10.22302/ppk.jpk.v32i2.163
Suheiti, K., & Suharyon. (2020). Pendampingan Optimalisasi Mutu Karet Rakyat Di Kabupaten Sarolangun. Jurnal Khazanah Intelektual, 2(3), 311–323. https://doi.org/10.37250/newkiki.v2i3.30
Suksup, R., Imkaew, C., & Smitthipong, W. (2017). Cream concentrated latex for foam rubber products. IOP Conference Series: Materials Science and Engineering, 272(1). https://doi.org/10.1088/1757-899X/272/1/012025
Suwardin, D. (2015). Jenis Bahan Penggumpal Dan Pengaruhnya Terhadap Parameter Mutu Karet Spesifikasi Teknis. Warta Perkaretan, 34(2), 147. https://doi.org/10.22302/ppk.wp.v34i2.256
Yasinta, Y., Edison, R., & Maryanti, M. (2019). Teknologi Pembuatan Lateks Dadih Melalui Proses Penggetaran. Jurnal Agro Industri Perkebunan, 7(1), 51. https://doi.org/10.25181/jaip.v7i1.906
Downloads
Published
Issue
Section
License
Copyright (c) 2023 Maryanti Maryanti, Febrina Delvitasari, Widia Rini Hartari, Sintya Widianti
This work is licensed under a Creative Commons Attribution 4.0 International License.
