Arduino Based Automatic Door Opening and Closing Prototype Design Using Ultrasonic Sensors at the Faridh Collection Store in Ketowan Village
DOI:
https://doi.org/10.33379/gtech.v8i3.4299Keywords:
prototype, Automatic Door, arduino, Ultrasonic SensorAbstract
This research uses qualitative action research method with a focus on developing automatic door prototypes at Faridh Collection Stores. The problems identified were queues and accessibility difficulties at store entrances and exits. As a result, a prototype was successfully built with the integration of Arduino Uno, ultrasonic sensors, buzzers, and servo motors. The prototype is effective in detecting objects near doors and performing automatic movements. It is hoped that this system will ease the flow of customer traffic, improving the convenient shopping experience, especially for customers carrying goods or child strollers. This research shows solutions and hopes on this system to solve queuing problems and accessibility difficulties in Faridh Collection stores
References
Adella, A. F., Putra, Muh. F. P., Taufiqurrahman, F., & Kaswar, A. B. (2020). Pintu Otomatis Berbasis Ultrasonic Internet Of Things. Media Elektr., 17(3), 1–7.
Dabinda, H. R. (2021). Analisis Faktor-Faktor Yang Mempengaruhi Keputusan Pembelian Produk Busana Gamis Wanita Pada Toko Baju Aa Di Pasar Pemda Cikampek. Syntax Literate ; Jurnal Ilmiah Indonesia, 6(10), 5016. Https://Doi.Org/10.36418/Syntax-Literate.V6i10.4265
Dokumen, P., Kecamatan, K., & Kurniati, L. (2021). Penerapan Metode Prototype Pada Perancangan Sistem. In Journal Of Software Engineering Ampera (Vol. 2, Issue 1). Https://Journal-Computing.Org/Index.Php/Journal-Sea/Index
Fauzan, Z., & Baijuri, A. (2023). Zaenul Fauzan, Dkk Informatics And Business Institute Darmajaya Sistem Pendukung Keputusan Untuk Penilaian Kinerja Guru Sma Negeri 1 Sukosari Menggunakan Metode Simple Additive Weighting (Saw). In Jurnal Informatika (Vol. 23, Issue 2).
Fitri Rashad, A., Wahyudi Marzuk, D., Bagaskara, R., Sriwijaya Jl Raya Palembang -Prabumulih Km, U., & Ogan Ilir, I. (N.D.). Prototipe Pintu Geser Otomatis Satu Arah Berbasis Mikrokontroler Menggunakan Sensor Jarak.
Fridayanthie, E. W., Haryanto, H., & Tsabitah, T. (2021). Penerapan Metode Prototype Pada Perancangan Sistem Informasi Penggajian Karyawan (Persis Gawan) Berbasis Web. Paradigma - Jurnal Komputer Dan Informatika, 23(2). Https://Doi.Org/10.31294/P.V23i2.10998
Ipanhar, A., Wijaya, T. K., & Gunoto, P. (N.D.). 1) , [email protected] 2) , [email protected]. Sigma Teknika, 5(2), 333–350.
Rijal Fadli, M. (2021). Memahami Desain Metode Penelitian Kualitatif. 21(1), 33–54. Https://Doi.Org/10.21831/Hum.V21i1
Rosaly, R., Prasetyo, A., & Kom, M. (N.D.). Pengertian Flowchart Beserta Fungsi Dan Simbol-Simbol Flowchart Yang Paling Umum Digunakan.
Sholeh, R., & Huda, D. K. (N.D.). Pengaruh Kemajuan Teknologi Terhadap Volume Pejualan Ritel Di Kota Mojokerto.
Siswidiyanto, S., Munif, A., Wijayanti, D., & Haryadi, E. (2020a). Sistem Informasi Penyewaan Rumah Kontrakan Berbasis Web Dengan Menggunakan Metode Prototype. Jurnal Interkom: Jurnal Publikasi Ilmiah Bidang Teknologi Informasi Dan Komunikasi, 15(1), 18–25. Https://Doi.Org/10.35969/Interkom.V15i1.64
Siswidiyanto, S., Munif, A., Wijayanti, D., & Haryadi, E. (2020b). Sistem Informasi Penyewaan Rumah Kontrakan Berbasis Web Dengan Menggunakan Metode Prototype. Jurnal Interkom: Jurnal Publikasi Ilmiah Bidang Teknologi Informasi Dan Komunikasi, 15(1), 18–25. Https://Doi.Org/10.35969/Interkom.V15i1.64
Sri Ulfa, M., & Eva Nasryah, C. (2020). Pengembangan Media Pembelajaran Pop-Up Book Untuk Meningkatkan Motivasi Belajar Siswa Kelas Iv Sd. In Jurnal Ilmiah Pendidikan (Vol. 1).
Tri Wahyudi, A., Wahyu Hutama, Y., Bakri, M., Dadi Rizkiono, S., & Studi Teknik Komputer, P. (2020). Sistem Otomatis Pemberian Air Minum Pada Ayam Pedaging Menggunakan Mikrokontroller Arduino Dan Rtc Ds1302. In Jtikom (Vol. 1, Issue 1).
Wahyu, E., & Budianto, H. (N.D.). Safe Deposit Box Pada Lembaga Keuangan Syariah Dan Konvensional: Studi Pustaka (Library Research) Dan Bibliometrik Vosviewer. Https://Doi.Org/10.5281/Zenodo.10078581
Zanofa, A. P., Arrahman, R., Bakri, M., & Budiman, A. (2020). Pintu Gerbang Otomatis Berbasis Mikrokontroler Arduino Uno R3. In Jtikom (Vol. 1, Issue 1).
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Septia Nur Imania, Abd. Ghofur, Farihin Lazim
This work is licensed under a Creative Commons Attribution 4.0 International License.
