Strategy to Increase Productivity of Light Brick Installation Work for Residential Houses Using the Objective Matrix (OMAX) and Fault Tree Analysis (FTA) Methods
DOI:
https://doi.org/10.33379/gtech.v8i3.4557Keywords:
Light Brick; FTA, Productivity; Residential Houses; OmaxAbstract
Along with the increasing population growth, the need for housing also continues to grow. This is in line with the efforts of the Bojonegoro Regency Government in prospering its community through the aladin program, namely roofs, floors and walls for uninhabitable houses (UH) in the community. With a target of 2018 to 2023 is as many as 22,528 residential housing units that can be realized. And one of the materials used is light brick material which is expected to make the work faster and more efficient. The purpose of this study is to determine the productivity value of light brick installation using the objective matrix method. By conducting observations and measurements in the field, the Productivity Index (IP) value with the largest value was in the third house of 177.67 and the lowest was the ninth house with a value of 4.00. And after analyzing the indicators from the calculation of the ratio 1-3, it is known that the lowest ratio is at ratio 3 and recommendations for improvement are obtained to increase productivity
References
Akbar, I., Wijayaningtyas, M., & Ratnawinanda, L. A. (2020). Analisis Koefisien Produktivitas Pasangan Dinding Bata Ringan Gedung Keolahragaan Universitas Negeri Malang. E-Journal GELAGAR, 2(1), 1–8.
Asnudin, Andi Iskandar Z, A. (2023). Analisis Produktivitas Pekerja Konstruksi Pada Pekerjaan Pasangan Dinding Bata Proyek Pembangunan Gedung Serbaguna Di Lingkungan Universitas Tadulako. 15(2), 95–105.
Avianda, D., Yuniati, Y., & Yuniar. (2014). Strategi Peningkatan Produktivitas di Lantai Produksi Menggunakan Metode Objective Matrix ( OMAX ). Jurnal Online Institut Teknologi NAsional, 01(04), 202–213.
Eppendie, A., & Kushartomo, W. (2023). Analisis Efektifitas Penggunaan Bata Ringan Sebagai Pengganti Bata Merah Pada Konstruksi Gedung Bertingkat. JMTS: Jurnal Mitra Teknik Sipil, 6(3), 595–600. https://doi.org/10.24912/jmts.v6i3.23033
Erdhianto, Y., & Basuki HM, G. (2019). Analisa Produktivitas pada PT. Pekebunan Nusantara (PTPN) X PG Kremboong dengan Metode Objective Matrix (OMAX). KAIZEN : Management Systems & Industrial Engineering Journal, 2(2), 67
Faris, Muhammad, dkk (2015), Usulan peningkatan produktivitas di lantai produksi menggunakan metode objective matrix (omax), Jurnal Online Institut Teknologi Nasional, No. 4, Volume. 03.
Hadi, Yuswono, Wardoyo Priskila Putri, (2016). Peningkatan Produktivitas UMKM Menggunakan Metode Objective Matrix (OMAX), Jurnal Online Universitas Ma Chuang, No.1, Vol.4, Malang.
Juniwati Ayuningtyas, F., & Purwaning Astuti, I. (2018). Faktor Penentu Permintaan Rumah Tinggal Di Provinsi Daerah Istimewa Yogyakarta. Jurnal Ekonomi & Studi Pembangunan, 19(1), 85–90. https://doi.org/10.18196/jesp.19.1.3890
Nova, Aulia Sri dharma, (2017). Penerapan motode objective matrix (OMAX) dalam menganalisis produktivitas di PT. Nusantara Beta Farma Padang, Skripsi, Padang.
Setiowati, R. (2017). Analisis Pengukuran Produktivitas Departemen Produksi Dengan Metode Objective Matrix (Omax) Pada Cv. Jaya Mandiri. Faktor Exacta, 10(December 2012), 199–209.
Silalahi, L. A., Rispianda, & Yuniar. (2014). Usulan Strategi Peningkatan Produktivitas Berdasarkan Hasil Analisis Pengukuran Objective Matrix (OMAX) pada Departemen Produksi Transformer(Studi Kasus di PT. XYZ). Jurnal Online Institut Teknologi Nasional Jurusan Tehnik Industri No.03, 02(Peningkatan Produktivitas), 84–95.
Suhardini, D., Pakpahan, A. K., & Astuti, A. T. (2016). Pengukuran Produktivitas Lini Produksi Produk Panel Box Pt. Dwimukti Graha Elektrindo Dengan Menggunakan Metode Objective Matrix (Omax) Dan Perbaikan Produktivitas. Jurnal Teknik Industri, 6(2), 101–113. https://doi.org/10.25105/jti.v6i2.1534
Sutama, A., Irawan, T., & Belakang, A. L. (2023). 1077-Article Text-2269-1-10-20240117. 13(2), 95–99.
Wibisono, D. (2019). Analisis Produktivitas Dengan Menggunakan Pendekatan Metode Objective Matrix (OMAX) Studi Kasus di PT. XYZ. Jurnal Optimasi Teknik Industri (JOTI), 1(1), 1–7
Yanti, G. (2017). Produktivitas Tenaga Kerja Dengan Metode Work Sampling Proyek Perumahan Di Kota Pekanbaru. SIKLUS: Jurnal Teknik Sipil, 3(2), 100–106. https://doi.org/10.31849/siklus.v3i2.385
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Moh. Sholahuddin
This work is licensed under a Creative Commons Attribution 4.0 International License.
