Optimization of Natural Adhesive Type and Concentration on Characteristics of Corn Cob Biobriquettes

Authors

  • Adam Yonanda Institut Teknologi Nasional Malang, Indonesia
  • Elvianto Dwi Daryono Institut Teknologi Nasional Malang, Indonesia

DOI:

https://doi.org/10.70609/gtech.v9i1.6194

Keywords:

Biobriquettes, Corn Cob, Sago Adhesive, Tapioca Adhesive, Wheat Adhesive

Abstract

This study aims to evaluate the effect of wheat flour, starch, and sago adhesive variations on the characteristics of corn cob-based biobriquettes. Against the backdrop of fossil fuel scarcity and the abundance of corn cob waste, this research offers a solution to utilize the waste as an alternative fuel in the form of briquettes. The use of adhesives is an important element in the manufacture of quality briquettes. Adhesives not only play a role in maintaining the density of briquettes, but also affect the overall quality of the product. Different types of adhesives will result in different briquette quality, due to the different chemical compositions among the adhesives. The use of three types of adhesives with varying concentrations is expected to affect the quality of the briquettes based on SNI 01-6235-2000 standards. Testing the characteristics of biobriquettes includes moisture content, ash content, calorific value, and combustion rate. The results of this study found that the most optimal biobriquettes were 15% tapioca adhesive with the highest calorific value of 5563.13 cal/g, water content of 1.96%, ash content of 3%, volatile matter content of 5.76%, bound carbon content of 89.28%, and burning rate of 0.49 g/min. The biobriquettes have met SNI-01-6235-2000.

References

Abdillah, M. F., & Siregar, I. H. (2024). Pengaruh Variasi Konsentrasi Perekat Tepung Tapioka Terhadap Karakteristik Biobriket Campuran Arang Tempurung Kelapa dan Janggel Jagung. Jtm, 12(02), 89–100.

Aljarwi, M. A., Pangga, D., & Ahzan, S. (2020). Uji Laju Pembakaran Dan Nilai Kalor Briket Wafer Sekam Padi Dengan Variasi Tekanan. ORBITA: Jurnal Kajian, Inovasi Dan Aplikasi Pendidikan Fisika, 6(2), 200. https://doi.org/10.31764/orbita.v6i2.2645

Almu, M. A., Syahrul, & Padang, Y. A. (2014). Analisa Nilai Kalor Dan Laju Pembakaran Pada Briket. Dinamika Teknik Mesin, 4(2), 117–122.

Amrullah, S., & Oktaviananda, C. (2023). Karakterisasi Briket Bonggol Jagung dengan Variasi Konsentrasi Tepung Beras Ketan sebagai Perekat. Jurnal Teknologi Pertanian Gorontalo (JTPG), 8(1), 15–20. https://doi.org/10.30869/jtpg.v8i1.1142

Anizar, H., Sribudiani, E., & Somadona, S. (2020). Pengaruh Bahan Perekat Tapioka Dan Sagu Terhadap Kualitas Briket Arang Kulit Buah Nipah. Perennial, 16(1), 11–17. http://dx.doi.org/10.24259/perennial.v16i1.9159

Badan Standardisasi Nasional. (2000). SNI 01-6235-2000 Briket Arang Kayu

Cholilie, I. A., & Zuari, L. (2021). Pengaruh Variasi Jenis Perekat terhadap Kualitas Biobriket Berbahan Serabut dan Tandan Buah Lontar (Borassus flabellifer L.). Agro Bali : Agricultural Journal, 4(3), 391–402. https://doi.org/10.37637/ab.v4i3.774

Dinas Komunikasi dan Informatika. (2024). Kabupaten Malang Satu Data

Haryono, H. (2020). Uji Kualitas Briket dari Tongkol Jagung dengan Perekat Kanji/PET dan Komposisi Gas Buang Pembakarannya. Jurnal Ilmu Dan Inovasi Fisika, 4(2), 131–139. https://doi.org/10.24198/jiif.v4i2.28606

Irawansyah, H., Nugraha, A., Afifudin, M. N., Muhammad, M., & Al’Arisko, R. N. (2022). Pengaruh Variasi Ukuran Serbuk (Mesh) Dan Persentase Perekat Tapioka Terhadap Sifat Fisik Pellet Kayu Gelam. Multitek Indonesia, 15(2), 13–22. https://doi.org/10.24269/mtkind.v15i2.4194

Jayana, R., & Evila Purwanti Sri Rahayu, T. (2022). Pengaruh Variasi Rasio Perekat Terhadap Nilai Kalor Briket dari Ranting Kayu dan Sekam Padi Effect of Adhesive Concentration Variation on Calorific Value of Wood Branch and Rice Husks Briquette. Seminar Nasional Inovasi Dan Pengembangan Teknologi Terapan (SENOVTEK) Cilacap, 71–78. https://ejournal.pnc.ac.id/index.php/senovtek

Kinanthi Pangestuti, E., & Darmawan, P. (2021). Analysis of Ash Contents in Wheat Flour by The Gravimetric Method. Jurnal Kimia Dan Rekayasa, 2(1), 16–21. https://doi.org/10.31001/jkireka.v2i1.22

Mahadi, I., Zulfarina, Z., & Panggabean, Y. U. (2023). Pengaruh Konsentrasi Campuran Perekat Kanji Dan Sagu Terhadap Mutu Briket Limbah Kulit Kolang Kaling (Arenga pinnata Merr.). Bio-Lectura : Jurnal Pendidikan Biologi, 10(1), 36–45. https://doi.org/10.31849/bl.v10i1.13248

Pamudiarini, R. D., Arifin, & Wivina Diah Ivontiani. (2021). Potensi Briket Arang dari Tongkol Jagung dan Ampas Teh sebagai Energi Terbarukan. Jurnal Rekayasa Lingkungan Tropis, 2(1), 1–10. https://jurnal.untan.ac.id/index.php/jurlis/article/view/46597

Pangga, D., Safitri, B. R. A., Sani, A. A., & Prayogi, S. (2022). Pengaruh Variasi Bahan Perekat Biobriket Berbahan Dasar Tongkol Jagung Terhadap Nilai Kalor Dan Laju Pembakaran. ORBITA: Jurnal Pendidikan Dan Ilmu Fisika, 8(1), 175. https://doi.org/10.31764/orbita.v8i1.7934

Pejabat Pengelola Informasi dan Dokumentasi. (2024). Badan Pusat Statistik

Rifdah, R., Herawati, N., & Dubron, F. (2018). Pembuatan Biobriket Dari Limbah Tongkol Jagung Pedagang Jagung Rebus Dan Rumah Tangga Sebagai Bahan Bakar Energi Terbarukan Dengan Proses Karbonisasi. Jurnal Distilasi, 2(2), 39. https://doi.org/10.32502/jd.v2i2.1202

Sulistyaningkarti, L., & Utami, B. (2017). Making Charcoal Briquettes from Corncobs Organic Waste Using Variation of Type and Percentage of Adhesives. JKPK (Jurnal Kimia Dan Pendidikan Kimia), 2(1), 43. https://doi.org/10.20961/jkpk.v2i1.8518

Wibowo Kurniawan, E. (2019). Studi Karakteristik Briket Tempurung Kelapa dengan Berbagai Jenis Perekat Briket. Buletin Loupe, 15(01), 7. https://doi.org/10.51967/buletinloupe.v15i01.24

Widarti, B. N., Sihotang, P., & Sarwono, E. (2016). Penggunaan Tongkol Jagung Akan Meningkatkan Nilai Kalor Pada Briket. Jurnal Integrasi Proses, 6(1), 16–21.

Downloads

Published

2025-01-10

How to Cite

Optimization of Natural Adhesive Type and Concentration on Characteristics of Corn Cob Biobriquettes. (2025). G-Tech: Jurnal Teknologi Terapan, 9(1), 304-312. https://doi.org/10.70609/gtech.v9i1.6194

Most read articles by the same author(s)