Analysis of Corn Cob Briquette Characteristics Using Different Adhesives in the Pyrolysis Process

Authors

  • David Mangallo Universitas Cenderawasih, Indonesia
  • Thomas Pagasis Universitas Cenderawasih, Indonesia
  • Rombe Allo Universitas Cenderawasih, Indonesia
  • Mickael Ruben Kaiway Universitas Cenderawasih, Indonesia
  • Enos Tambing Universitas Cenderawasih, Indonesia
  • Selyus Rantepulung Universitas Cenderawasih, Indonesia

DOI:

https://doi.org/10.70609/gtech.v9i2.6635

Keywords:

Corn cobs, Briquette characteristics, Alternative energy, Adhesive, WBT

Abstract

Corn cobs, an abundant agricultural waste, represent a promising alternative energy source when converted into briquettes. This study aimed to characterize corn cob briquettes and determine the optimal adhesive type and concentration for enhanced performance. Charcoal was produced from corn cobs via pyrolysis in repurposed oil drums, then ground and sieved through a 60-mesh screen. The resultant charcoal was combined with either starch or sago starch adhesives at concentrations of 7.5%, 10%, 12.5%, and 15% and subsequently molded into honeycomb briquettes using a 4-inch diameter mold with 16 perforations, fabricated from galvanized iron pipes and operated with a hydraulic jack. Proximate analysis indicated moisture levels of 5.37–6.71%, ash levels of 30.64–39.16%, volatile matter levels of 20.61–23.07%, fixed carbon proportions of 32.53–42.44%, and calorific values between 2893 and 3727 kcal/kg. A Water Boiling Test conducted with 1 liter of water demonstrated that briquettes incorporating 7.5% sago starch adhesive achieved boiling within 36 minutes, indicating superior combustion efficiency. These findings confirm the potential of corn cob briquettes as a renewable energy source and underscore the critical role of adhesive formulation in optimizing biomass fuel performance.

References

Arora, P., Das, P., Jain, S., & Kishore, V. V. N. (2014). A laboratory based comparative study of Indian biomass cookstove testing protocol and Water Boiling Test. Energy for Sustainable Development, 21, 81–88. doi: 10.1016/j.esd.2014.06.001

Ding, Y., & Yue, Z. Q. (2018). An experimental investigation of the roles of water content and gas decompression rate for outburst in coal briquettes. Fuel, 234, 1221–1228. doi: 10.1016/j.fuel.2018.07.143

Fachruzzaki, Lestari, R., & Aminah, S. (2025). A Study on the Effect of Rice Husk Charcoal Mix on Coal Briquettes Using the Carbonization Method with Tapioca Flour Adhesive. IOP Conference Series: Earth and Environmental Science, 1451(1), 012024. doi: 10.1088/1755-1315/1451/1/012024

Finney, K. N., Sharifi, V. N., & Swithenbank, J. (2009). Fuel Pelletization with a Binder: Part II — The Impacts of Binders on the Combustion of Spent Mushroom Compost−Coal Tailing Pellets. Energy & Fuels, 23(6), 3203–3210. doi: 10.1021/ef900021t

Haryanto, B., Hutagaol, L. N., Sianturi, N. C., Fazira, M., Sitorus, J., & Alexander, V. (2024). Purification of used cooking oil using natural corn cob and carbon corn cob as adsorbent with batch operation. IOP Conference Series: Earth and Environmental Science, 1302(1), 012067. doi: 10.1088/1755-1315/1302/1/012067

Inegbedi̇on, F. (2022). Estimation of the moisture content, volatile matter, ash content, fixed carbon and calorific values of saw dust briquettes. MANAS Journal of Engineering, 10(1), 17–20. doi: 10.51354/mjen.940760

Inegbedion, F., & Ikpoza, E. (2022). Estimation of the Moisture Content, Volatile Matter, Ash Content, Fixed Carbon and Calorific Values of Rice Husk Briquettes. Proceedings of the International Conference on Industrial Engineering and Operations Management, 1–9. Nsukka, Nigeria: IEOM Society International. doi: 10.46254/AF03.20220100

Johanes Saragih, K., A. Abdullah, N., & Bahri Widodo, S. (2024). Effect of Carbonization Temperature of Charcoal Briquettes from Corn Cob with Gondorukem (Resina Colophonium) Adhesive On Briquette Quality Standards. JURUTERA - Jurnal Umum Teknik Terapan, 11(02), 83–91. doi: 10.55377/jurutera.v11i02.10364

Kaur, P., Singh, J., Kaur, M., Rasane, P., Kaur, S., Kaur, J., … Sowdhanya, D. (2023). Corn Silk as an Agricultural Waste: A Comprehensive Review on Its Nutritional Composition and Bioactive Potential. Waste and Biomass Valorization, 14(5), 1413–1432. doi: 10.1007/s12649-022-02016-0

Kiang, Y.-H. (2018). Database and analysis of fuel properties, fossil fuel, biomass, refuse-derived fuel, waste, biosludge and biocarbon. In Fuel Property Estimation and Combustion Process Characterization (pp. 67–169). Elsevier. doi: 10.1016/B978-0-12-813473-3.00004-0

Kilpimaa, S., Kuokkanen, T., & Lassi, U. (2013). Characterization and Utilization Potential of Wood Ash from Combustion Process and Carbon Residue from Gasification Process. BioResources, 8(1), 1011–1027. doi: 10.15376/biores.8.1.1011-1027

Mae, A. I., Seguenza, J., & Bongay, C. (2022). Determination of physical and combustion properties of corncobs/rice bran briquettes with cassava and corn starch binder. Journal of Biofuels, 13(1), 16–27. doi: 10.5958/0976-4763.2022.00003.4

Mari Selvam, S., Janakiraman, T., & Paramasivan, B. (2021). Characterization of engineered corn cob biochar produced in allothermal pyrolysis reactor. Materials Today: Proceedings, 47, 312–317. doi: 10.1016/j.matpr.2021.04.469

Muliani, M., Pangga, D., & Ahzan, S. (2024). Optimization of Binder Percentage in Organic Waste-Based Briquettes: Impact on Calorific Value and Combustion Rate. Lensa: Jurnal Kependidikan Fisika, 12(2), 229. doi: 10.33394/j-lkf.v12i2.13314

Napitupulu, R. A. M., Ginting, S., Naibaho, W., Sihombing, S., Tarigan, N., & Kabutey, A. (2020). The effect of used lubricating oil volume as a binder on the characteristics of briquettes made from corn cob and coconut shell. IOP Conference Series: Materials Science and Engineering, 725(1), 012010. doi: 10.1088/1757-899X/725/1/012010

Nasruddin, N., & Affandy, R. (2011). Karakteristik Briket dari Tongkol Jagung dengan Perekat Tetes Tebu dan Kanji. 22(2), 1–10. doi: https://doi.org/10.28959/jdpi.v22i2.541

Pulungan, M. A., Siahaan, S., & Benu, S. M. (2023). Analysis of the Effect of Tapioca Flour Adhesive on the Characteristics of Palm Oli Empty Charcoal Briquettes. International Journal of Research in Vocational Studies (IJRVOCAS), 2(4), 8–12. doi: 10.53893/ijrvocas.v2i4.156

Rindayatno, Rosdiana, & Agung Priyo Hutomo. (2024). The Effect of Adhesive Ratio on the Quality of Charcoal Briquettes. International Journal of Scientific Multidisciplinary Research, 2(10), 1453–1462. doi: 10.55927/ijsmr.v2i10.11987

Setiawan, B., Himawanto, D. A., Budiana, E. P., & Widodo, P. J. (2016). Analisa Thermogravimetry Pada Pirolisis Limbah Pertanian. ETHOS (Jurnal Penelitian Dan Pengabdian), 49. doi: 10.29313/ethos.v0i0.1704

Wang, L., Wang, S., Zhou, J., Xie, L., Qin, H., & Ma, H. (2022). A Scientometric Review: Biomass Gasification Study from 2006 to 2020. ACS Omega, 7(43), 38246–38253. doi: 10.1021/acsomega.2c05527

Wirabuana, A. D., & Alwi, R. S. (2021). Influence of starch binders composition on properties of biomomass briquettes from Durian peel (Durio kutejensis Becc). 020020. Surabaya, Indonesia. doi: 10.1063/5.0051733

Yunusa, N., Mamoon, A., & Muktar, M. (2023). Production and Characterization of Bio-Briquette Produced from Rice Husk, Corn Cob and Charcoal Dust. International Journal of Scientific Engineering and Research, 11(9), 1–5. doi: 10.70729/SE23904185558

Downloads

Published

2025-04-10

How to Cite

Analysis of Corn Cob Briquette Characteristics Using Different Adhesives in the Pyrolysis Process. (2025). G-Tech: Jurnal Teknologi Terapan, 9(2), 779-788. https://doi.org/10.70609/gtech.v9i2.6635

Most read articles by the same author(s)