Application of Root Conflict Analysis (RCA+) to Identify Contradiction in Manufacturing Process
DOI:
https://doi.org/10.33379/gtech.v7i2.2448Keywords:
Quality, Manufacturing Process, Defect, Root Conflict Analysis (RCA ), ContradictionAbstract
The presence of defects is a sign that the level of quality is not good enough. In this paper, we will discuss root cause analysis in the manufacturing process. In addition to analyzing the root of the problem, there are usually conditions called contradictions. Contradiction means a condition in which positive and negative effect simultaneously occur at the same time. Therefore, the Root Conflict Analysis (RCA+) has been adopted to find the root cause of the problem and at the same time identify the contradictions. Implementation of this method is carried out on the drilling process of composite fiber-reinforced plastic (CFRP). Based on the results, it was found that there are 3 causes of problems in the drilling process, high cutting speed, high feed rate and large point angle. As well as found several contradictions, regarding drilling productivity, tool temperature, thrust force during the process and drill burr.
References
Dhafr, N., Ahmad, M., Burgess, B., & Canagassababady, S. (2006). Improvement of quality performance in manufacturing organizations by minimization of production defects. Robotics and Computer-Integrated Manufacturing, 22, 536–542. https://doi.org/10.1016/j.rcim.2005.11.009
Gadd, K. (2011). TRIZ for Engineers: Enabling Inventive Problem Solving. In TRIZ for Engineers: Enabling Inventive Problem Solving. https://doi.org/10.1002/9780470684320
Geier, N., Xu, J., Pereszlai, C., Poór, D. I., & Davim, J. P. (2020). Drilling of carbon fibre reinforced polymer (CFRP) composites: Difficulties, challenges and expectations. Procedia Manufacturing, 54(August), 284–289. https://doi.org/10.1016/j.promfg.2021.07.045
Kozień, E. (2019). Quality Improvement in Production Process. Quality Production Improvement - QPI, 1(1), 596–601. https://doi.org/10.2478/cqpi-2019-0080
Láoh, S. F. (2021). Improving the results of an RCA+ through the use of a template (p. 4). http://essay.utwente.nl/86183/
Lin, X., Chen, B., Bai, Y., & Zhu, B. (2012). Study on effect of product liability to inherent safety. Procedia Engineering, 45(110401004), 271–275. https://doi.org/10.1016/j.proeng.2012.08.156
Maryanti, S., Suci, A., Sudiar, N., & Hardi, H. (2020). Root Cause Analysis for Conducting University ’ S. Jurnal Mananjemen Dan Kewirausahaan, 22(2), 152–160. https://doi.org/10.9744/jmk.22.2.152
Mo, J. P. T., & Suparayan, B. (2019). Failure mode – driven quality analysis of operational risks for composite fiber-reinforced plastic assembly. Journal of Engineering Manufacture, 233(1), 267–277. https://doi.org/10.1177/0954405417711733
Ndimele, P. E., Akanni, A., Shittu, J. A., Ewenla, L. O., & Ige, O. E. (2018). Trade-off Analyses of Ecosystem Services in Nigerian Waters. In The Political Ecology of Oil and Gas Activities in the Nigerian Aquatic Ecosystem. Elsevier Inc. https://doi.org/10.1016/B978-0-12-809399-3.00016-1
Powell, D., Magnanini, M. C., Colledani, M., & Myklebust, O. (2022). Advancing zero defect manufacturing: A state-of-the-art perspective and future research directions. Computers in Industry, 136, 103596. https://doi.org/10.1016/j.compind.2021.103596
Ryabchik, T. A., Smirnova, E. E., Lukashova, M. I., & Haydar, H. (2019). Manufacturing processes quality control as a main factor of performance enhancement in industrial management. Proceedings of the 2019 IEEE Conference of Russian Young Researchers in Electrical and Electronic Engineering, ElConRus 2019, 1463–1466. https://doi.org/10.1109/EIConRus.2019.8657176
Sarwar, J., Khan, A. A., Khan, A., Hasnain, A., Arafat, S. M., Ali, H. U., Uddin, G. M., Sosnowski, M., & Krzywanski, J. (2022). Impact of Stakeholders on Lean Six Sigma Project Costs and Outcomes during Implementation in an Air-Conditioner Manufacturing Industry. Processes, 10(12). https://doi.org/10.3390/pr10122591
Souchkov, V. (2011). A Guide to Root Conflict Analysis (RCA+). TRIZ and XTRIZ Techniques and References: Technology and Engineering Applications, 26.
Souchkov, V. (2017). Application of Root Conflict Analysis (RCA plus ) to formulate inventive problems in the maritime industry. Scientific Journals of the Maritime University of Szczecin-Zeszyty Naukowe Akademii Morskiej W Szczecinie, 51(123), 9–17. https://doi.org/10.17402/225
Tomić, B., & Brkić, V. S. (2011). Effective Root Cause Analysis and Corrective Action Process. Journal of Engineering Management and Competitiveness (JEMC) Mihajlo Pupin, 1(12), 16–20. http://www.tfzr.uns.ac.rs/jemc
Ulfah, M., Trenggonowati, D. L., Ekawati, R., & Ramadhania, S. (2019). The proposed improvements to minimize potential failures using lean six sigma and multi attribute failure mode analysis approaches. IOP Conference Series: Materials Science and Engineering, 673(1). https://doi.org/10.1088/1757-899X/673/1/012082
Vo, B., Kongar, E., & Suarez-Barraza, M. F. (2020). Root-Cause Problem Solving in an Industry 4.0 Con. IEEE Engineering Management Review, 48(1), 48–56. https://doi.org/10.1109/EMR.2020.2966980
Downloads
Published
Issue
Section
License
Copyright (c) 2023 Faishal Arham Pratikno, Muhamad Imron Zamzani, Noni Oktiana Setiowati
This work is licensed under a Creative Commons Attribution 4.0 International License.
