Rancang Bangun Mesin Penggilingan Padi Rumahan dengan Penggerak Dinamo Pompa Air
DOI:
https://doi.org/10.33379/gtech.v8i1.3563Keywords:
Rice mill machine, Water pump dynamo, Home ScaleAbstract
Currently, the rice milling process in Rawang Panca Arga Sub-district still uses a diesel car engine as the driving force. This machine has several drawbacks and emits harmful pollutants that are detrimental to respiratory health. Therefore, a compact and highly portable equipment was developed to meet the rice needs of farmers easily, without causing pollution. This rice milling machine uses a water pump dynamo that uses 125 Watts of electric current with a rotation of 2800 rpm and has a power of 3.28154 KW. The motor transmits its rotation using two clutches that can rotate the shaft of the penyosoh axle which is supported by two pillow block bearings. This machine has a grinding chamber with a maximum capacity of 72 kg/houre which is suitable for home-scale use.
References
Ashar & Iqbal. (2013). Penangan Pasca Panen Berbagai Varietas Padi dengan Rice Miling Unit (RMU). J. Galung Tropika. 55-59
Aji Widyanugraha, Aa Santosa dan Deri Teguh Santoso,(2020) “ Perancangan Mesin Penggiling Padi dan Penepung Sekam Padi Skala Rumah Tangga”.Jurnal Teknik Mesin. Politeknik Negeri Padang.Vol.13 No.2.69-75
Anton Kuswoyo,(2017),"Rancang Bangun Mesin Perontok Padi Portabel Dengan Penggerak Mesin Sepeda Motor," .Jurnal Elemen Vol. 4 Nomor 1, pp. 35-38.
Handoko Priono, Muhaammad Yusri Ilyas, Aditya Riska Nugroho, Dimas Setyawan, Laili Maulidiyah, Rinasa Agistya Anugrah, (2019).”Desain Pencacah Serabut Kelapa Dengan Penggerak Motor Listrik”.Jurnal Engine,Prodi Teknik Mesin, Universitas Proklamasi 45 Yogyakarta,Vol.3 No.1.
Ir.M.Saleh Al Amin,M.T.,Emidiana,M.T.,Nita Nurdiana,M.T.,(2023).”Pengaturan Dan Penggunaan Motor Listrik”.Jawa Tengah : PT.Nasya Expanding Management.
Khurmi, R.S. J.Gupta. (2005). “ Machine Design”. New Delhi : Eurasia Publising House.
Sudirman, Y., Waluyo, S., & Warji. (2014). Uji Kinerja Prototipe Alat Pembersih Gabah. Jurnal Teknik Pertanian, 3(1), 1–8.
Sularso dan Kiyokatsu Suga, (2004). “Dasar Perencanaan dan Pemilihan Elemen Mesin”. Jakarta: PT.Pradya Paramita.
Umar dan Alihamsyah. (2014).”Mekanisasi Pertanian untuk Produksi Padi di Lahan Rawa Pasang Surut”. Jakarta: IAARD Press.
Warisno, (2014). “Analisis Mutu Beras Pada Mesin Penggilingan Padi Berjalan Di Kabupaten Pringsewu”. (skripsi) Teknik Pertanian, UNILA.
Wayan Depanata,Bakti Agung W,Bayu Prasatyo,Winarto & Ridwan Baharta,(2021),”Rancang Bangun Mesin Polisher Beras Skala Laboratorium”.Jurnal Teknologi Pertanian,Politeknik Negeri Lampung Vol.13 No 1.
Windarta dan Efrizal Amami,(2016),”Rancang BangunMesin Pemisah Padi Isi Dengan Padi Kosong Kapasitas 10 Kg/Menit”.Jurnal Prosiding Senmastek Teknik Mesin,UMJ.
Wiraghani, S. R., dan Prasnowo, M. A.(2017), “Perancangan dan Pengembangan Produk Alat Potong Sol Sandal”. Engineering and Sains Journal Vol.1, No.1.
Yoshida, S. (1981). “Fundamental of Rice Crop Science”. International Ricec Researce Insitute. Los Banos, Philippines
Downloads
Published
Issue
Section
License
Copyright (c) 2023 Muhammad Iqbal Harapan Muslim Siregar, Bukhari, Tomi Abdilah, Tomi Irawan, Ali Hasimi Pane, Tengku Jukdin Saktisahdan
This work is licensed under a Creative Commons Attribution 4.0 International License.
